SMBJ440CA_15 Datasheet, PDF (1/6 Pages) Marl International Limited – 600W Surface Mount Transient Voltage Suppressors

SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD
Email:[e-mail] Tel:[phone] Fax:[phone]
SMBJ5.0 --- SMBJ440CA
600W Surface Mount
Transient Voltage
Suppressors
Features
 Working peak reverse voltage range – 5.0V to 440V.
 Peak power dissipation 600W @10 x 1000 us Pulse
 Low profile package.
 Excellent clamping capability.
 Glass passivated junction.
 Fast response time: typically less than 1 ns for Uni-direction.
Less than 5 ns for Bi-direction, from 0 Volts to BV min
 Typical IR less than 1uA above 10V.
 Plastic material has UL flammability classification 94V-O
 RoHS compliant in lead-free versions
Mechanical Characteristics
CASE: Void-free, JEDEC DO-214AA Molded Plastic over glass passivated junction..
Mounting Position: Any
Polarity: by cathode band denotes uni-directional device, none cathode band denotes bi-directional device.
Terminal: Solder plated, solderable per MIL-STD-750, Method 2026
Maximum Ratings And Characteristics @ 25°C Ambient Temperature (unless otherwise noted)
Parameter
Peak Pulse Power Dissipation on 10/1000 us Waveform (Note 1, 2, FIG.1)
Peak Pulse Current of on 10/1000us Waveform (Note 1, FIG.3)
Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on
Rated Load, (JEDEC Method) (Note 2. 3)
Operating Junction Temperature Range
Storage Temperature Range
Symbol
P_PPM
I_PPM
I_FSM
T_J
T_STG
Value
Min 600
See Table 1
100
-55 to 150
-55 to 150
Units
W
Amps
Amps
°C
°C
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above T_A=25°C per Fig.2.
2. Mounted on 5.0mm² (0.03mm thick) Copper Pads to each terminal.
3. 8.3 ms single half sine-wave, or equivalent square wave, Duty cycle=4 pluses per minute maximum.
WWW.SEMITECH.CN