LP4240-12-YZ-E_15 Datasheet, PDF (1/2 Pages) Marl International Limited – Switch-Mode LED Driver

LED Power Supply _Product
LP4240-XX-YZ-E Series
Switch-Mode LED Driver
Total Power
240 Watts
Input Voltages
90-264 VAC
Number of Outputs Three or Four
Specifications
ANZ#: Z099e, July 31, 2006
SPECIAL FEATURES
ELECTRICAL SPECIFICATIONS
• Three (3) or Four (4) independent Class 2 outputs ^{Input range}
90 to 264 VAC, Full range
• In compliance to EN61000-3-2, -3-3 Class D ^Frequency
•
Power Factor
Low Inrush Current maximize number of hookup _{Inrush current}
• Incompliance to NEMA3, IP66 standards
Input current
47 to 63 Hz
> 0.95 at full load, 115VAC
5.0 Amps maximum at 115VAC, cold start, 25º C
3.0Amps maximum at 115VAC
• Suitable for damp or dry locations
Efficiency
85% typical at 230VAC and maximum load
• Suitable for wet location w/adequate connectors ^{EMI filtering 47CFR, Part 2, Part 15 and Cispr PUB, 22 Class A}
• Aluminum extrusion enclosure, convection cool
Maximum power
Line Regulation
240W total
1%
• OCP, OTP and SCP w/ auto-recovery
Load Regulation ±3%
• DIN Rail Mounting – Optional
Ripple Noise 3% typ.
ENVIRONMENTAL
Leakage Current 2mA @ 110VAC, 4mA @ 230VAC
Operating temperature:
-30 to 70 º C
Hold up time Half cycle minimum at 120 VAC and 80% of rated
(De-rating : 2.5% per ºC from 50ºC~70ºC )
load
Storage temperature:
-40 to 85 º C
Protection
Over-voltage, Over-current, Over-temp. and Short
Humidity (Non-Condensing): 5% to 95%
circuit protection
Cooling:
Convection
SAFETY
Vibration Frequency:
5 to 50 Hz
UL/cUL
UL48, Class 2
MTBF: >100,000 Hours at full load and 25ºC _CE
Certified
ambient conditions (MIL-217F)
EMC : Compliant to 47CFR, Part 2, Part15 and
Cispr PUB, 22 Class B
MODEL INFORMATION
Model #
LP4240-12-YZ-E
LP4240-15-YZ-E
LP4240-24-YZ-E
LP3240-24-YZ-E
Channel 1
(VDC/Amp)
12VDC
0 ~ 5 Amp
15VDC
0 ~ 4 Amp
24VDC
0 ~ 2.5 Amp
24VDC
0 ~ 3.3 Amp
DC Output
Channel 2
Channel 3
(VDC/Amp) (VDC/Amp)
12VDC
12VDC
0 ~ 5 Amp
0 ~ 5 Amp
15VDC
15VDC
0 ~ 4 Amp
0 ~ 4 Amp
24VDC
24VDC
0 ~ 2.5 Amp 0 ~ 2.5 Amp
24VDC
24VDC
0 ~ 3.3 Amp 0 ~ 3.3 Amp
Channel 4
(VDC/Amp)
12VDC
0 ~ 5 Amp
15VDC
0 ~ 4 Amp
24VDC
0 ~ 2.5 Amp
---
---
Output per
Channel
(Watts)
60
60
60
80
Total Output
(Watts)
240
240
240
240
MECHANICAL DRAWING
Model Information – Single DC output
LP4240-XX-YZ-E and LP3240-XX-YZ-E
XX – DC outputs
Y – AC input connector (J – Junction Box)
Z – DC output connector (G – Gland, T – Terminal Block or J – Junction Box)
E – Aluminum extrusion enclosure length (Refer to mechanical drawing)
INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:[phone] Fax: [phone] www.magtechind.com Anz099e