LP1090-36-YZ-E Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Switch-Mode LED Driver

LED Driver
Product
LP1090-XX-YZ-E Series
Switch-Mode LED Driver
Specifications
Total Power
96 Watts
Input Voltages
90-264 VAC or 100-277VAC
ANZ#: Z097d, Oct. 2, 2006
Number of Outputs One
SPECIAL FEATURES
ELECTRICAL SPECIFICATIONS
• UL1310 / UL48 Class 2 certified
Input range
90 to 264 VAC, Full range or 100-277VAC
• Various DC output available, max 96-Watts ^Frequency
• Meet IP64 standards
Power Factor
Crest Factor
• Suitable for damp or dry locations
Inrush current
47 to 63 Hz
> 0.95 at full load, 115VAC
1.5 max.
40.0 Amps maximum at 230VAC, cold start, 25º C
• Suitable for wet location with adequate end ^{Input current}
1.5Amps maximum at 90VAC
plate and connectors
Efficiency
85% typical at 230VAC and maximum load
• Designed for outdoor or indoor applications
• Built-in wiring compartments for easy
installation (selected models)
• Compact, lightweight w/ aluminum case
EMI filtering
Maximum power
Current Adjust
range
Load regulation
47CFR, Part 2, Part 15 and Cispr PUB, 22 Class A
96W
30 ~ 50%
±3%
• Active PFC to conserve power consumption Leakage Current 0.2mA @ 110VAC, 0.4mA @ 230VAC
• DIN Rail Mounting – Optional
Hold up time
ENVIRONMENTAL
Operating temperature:
-30 to 70 º C
Protection
(De-rating : 2% per º C from 50ºC )
Storage temperature:
-40 to 85 º C
SAFETY
Humidity (Non-Condensing): 5% to 95%
UL
Cooling:
Convection
CE
Half cycle minimum at 120 VAC and 80% of rated
load
Over-voltage, Over-current, Over-power and Short
circuit protection: Auto-recovery
UL1310 / UL48 Class 2 certified
Certified
Vibration Frequency:
5 to 50 Hz
MTBF: >100,000 Hours at full load and 25ºC
ambient conditions (MIL-217F)
EMC : Compliant to 47CFR, Part 2, Part15 and
Cispr PUB, 22 Class B
MODEL INFORMATION – SINGLE OUTPUT
Constant Voltage Mode
Constant Current Mode
Model Numbers
Output
Output
Adjust range (Vdc) Current range (A) Voltage range (Vdc) Adjust range (A)
LP1090-36-YZ-E
24 ~ 36
1.0 ~ 2.66
18 ~ 36
1.50 ~ 2.66
LP1090-24-YZ-E
18 ~ 24
1.5 ~ 4.00
12 ~ 24
2.50 ~ 4.00
LP1090-19-YZ-E
12 ~ 19
2.0 ~ 5.00
10 ~ 19
3.00 ~ 5.00
Total output
(Watts)
96
96
96
MECHANICAL DRAWING
Model Information – Single DC output
LP1090-XX-YZ-E
XX – DC outputs
Y – AC input side plate options, refer to drawing for more details
Z – DC output side plate options, refer to drawing for more details
E – Aluminum enclosure length, 170, 240, 290mm, refer to drawing for more details
Housing “240”, “290” – The wiring compartment is accessed through side plate only.
Housing “249”, “299” – The wiring compartment can be accessed from the top plate.
INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:[phone] Fax: [phone] www.magtechind.com Anz097d