LP1040CC_15 Datasheet, PDF (1/2 Pages) Marl International Limited – Switch-Mode LED Driver

LED Driver
LP1040-xx Series
Switch-Mode LED Driver
Total Power
40 Watts
Input Voltages
90 ~ 264VAC, 277VAC
Number of Outputs One
Product
Specifications
ANZ#: Z094i, October 9, 2008
SPECIAL FEATURES
ELECTRICAL SPECIFICATIONS
• UL1310, Class 2 and UL48 compliant
Input range
90 ~ 264 VAC, 277VAC (optional)
• Single output, ranged from 10V up to 36VDC ^Frequency
• IP66 compliant
Power Factor
Crest Factor
• Suitable for dry and damp locations
Inrush current
47 to 63 Hz
> 0.90 at full load, 115VAC
1.5 max.
30.0 Amps maximum at 230VAC, cold start, 25º C
• Designed for outdoor or indoor applications ^{Input current}
0.50 Amps maximum at 115VAC
• Suitable in standard electrical junction boxes
• Compact, lightweight
• Active PFC reduces power consumption
Efficiency
EMI filtering
Maximum power
Current Accuracy
85% typical at maximum load
47CFR, Part 2, Part 15 and Cispr PUB, 22 Class B
40W
±1% (when applicable)
ENVIRONMENTAL
Load regulation ±3%
Operating temperature:
-30 to 60 º C ^{Leakage Current N/A}
(De-rating : 1% per º C from 60~70ºC ) ^{Hold up time}
300uA typ. half cycle minimum at 120 VAC and 80%
Storage temperature:
-40 to 85 º C
of rated load
Humidity (Non-Condensing): 5% to 95%
Protection
Over-voltage, Over current and Short circuit
Cooling:
Convection
protection: Auto-recovery
Vibration Frequency:
5 to 50 Hz
SAFETY
MTBF: >100,000 Hours at full load and 25ºC
UL
UL1310, Class 2 and UL879 recognized
ambient conditions (MIL-217F)
cUL
EMC : Compliant to 47CFR, Part 2, Part15 and
CE
Cispr PUB, 22 Class B
UL1310, Class 2 and UL879 recognized
Certified
Constant Voltage Mode
Constant Current Mode
Model Number
Output
Model Number
Output
V (DC)
A (mA) Watts
V (DC) mA (max.) Watts
LP1040-36
36, ±5% 111 - 1100
40
LP1040-36-Cxxxx 18~ 36 1110, ±5%
40
LP1040-24
24, ±5% 167 - 1670
40
LP1040-24-Cxxxx 12~ 24 1670, ±5%
40
LP1040-22
22, ±5% 182 - 1820
40
LP1040-22-Cxxxx 12 ~ 22 1820, ±5%
40
LP1040-18
18, ±5% 222 - 2220
40
LP1040-18-Cxxxx 9 ~ 18 2200, ±5%
40
LP1040-15
15, ±5% 268 - 2680
40
LP1040-15-Cxxxx 9 ~ 15 2680, ±5%
40
LP1040-13
13, ±5% 308 - 3080
40
LP1040-13-Cxxxx 7 ~ 13 3080, ±5%
40
LP1040-12
12, ±5% 333 - 3330
40
LP1040-12-Cxxxx 7 ~ 12 3330, ±5%
40
LP1040-10
10, ±5% 400 - 4000
40
LP1040-10-Cxxxx 6 ~ 10 4000, ±5%
40
LP1040-09
9, ±5% 445 - 4450
40
LP1040-09-Cxxxx
6~9
4450, ±5%
40
LP1040-09
5, ±5% 445 - 4450
Note: The output current of Constant Current models are
adjustable at factory from 50% ~ 100%.
RECOMMEND APPLICATION SCHEMATICS
R
R
40W, 24VDC
LP1040
R
R
This configuration is based on LED with the following parameters:
V : 3.0V ~ 3.5V I : 300mA ~ 350mA A. I : 300mA ~ 350mA
Recommended value for R is 20 ohm, 3W
INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:[phone] Fax: [phone] www.magtechind.com Anz094i