LP1025_15 Datasheet, PDF (1/1 Pages) Marl International Limited – Switch-Mode LED Driver

LED Driver
Product
LP1025-xx Series
Switch-Mode LED Driver
Total Power
25 Watts
Specifications
Input Voltages
90~264 VAC or 100-277VAC
Number of Outputs One
ANZ#: Z106e, November 28, 2006
SPECIAL FEATURES
ELECTRICAL SPECIFICATIONS
• UL1310 / UL48 Class 2 compliant
Input range
90 ~ 264 VAC, Full range or 100~277VAC
• Single output, constant current or constant
voltage design
• IP66 compliant
• Designed for outdoor or indoor applications
Frequency
Power Factor
Inrush current
Input current
Efficiency
47 to 63 Hz
> 0.92 at full load, 115VAC
20.0 Amps maximum at 230VAC, cold start, 25º C
0.4 Amps maximum at 115VAC
85% typical at maximum load
• Compact, lightweight in plastic case
EMI filtering
47CFR, Part 2, Part 15 and Cispr PUB, 22 Class B
• PFC to reduce power consumption
Maximum power 25W
Current Accuracy ±1% (when applicable)
Load regulation
ENVIRONMENTAL
Ripple/Noise
Operating temperature:
-30 to 60 º C _{Leakage Current}
(De-rating : 1% per º C from 60~70ºC ) _{Hold up time}
Storage temperature:
-40 to +85º C
Humidity (Non-Condensing): 5% to 95%
Cooling:
Convection
Protection
Vibration Frequency:
5 to 50 Hz
MTBF: >100,000 Hours at full load and 25ºC
ambient conditions (MIL-217F)
SAFETY
UL / cUL
EMC : Compliant to 47CFR, Part 2, Part15 and ^CE
±3%
N/A
300uA typ.
Half cycle minimum at 120 VAC and 80% of rated
load
Over-voltage, Over current and Short circuit
protection: Auto-recovery
UL1310 / UL48 Class 2 certified
Certified
Cispr PUB, 22 Class B
Model Number
LP1025-36
LP1025-24
LP1025-12
Constant Voltage Mode
Output
V (DC) A (mA) Watts
36, ±5%
700
25
24, ±5%
1040
25
12, ±5%
2080
25
Model Number
LP1025-36C0700
LP1025-24C1040
LP1025-12C2080
Constant Current Mode
Output
V (DC) A (mA)
Watts
18 ~ 36 700, ±5%
25
12 ~ 24 1040, ±5%
25
8 ~ 12 2080, ±5%
25
MECHANICAL DRAWING
INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:[phone] Fax: [phone] www.magtechind.com Anz106e