LP1020CC Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Switch-Mode LED Driver

LED Driver
LP1020-xx Series
Switch-Mode LED Driver
Total Power
20 Watts
Input Voltages
100 ~ 277 VAC
Number of Outputs One
Product
Specifications
ANZ#: Z095G, February 24, 2010
SPECIAL FEATURES
ELECTRICAL SPECIFICATIONS
• UL1310, Class 2 and UL879 recognized ^{Input range}
100 ~ 304 VAC
• Single output, constant current or constant
voltage design
• IP66 compliant
• Suitable for dry and damp locations
Frequency
Power Factor
Crest Factor
Inrush current
Input current
47 to 63 Hz
> 0.92 at full load, 115VAC
1.5 max.
10.0 Amps maximum at 230VAC, cold start, 25º C
0.3 Amps maximum at 115VAC
• Designed for outdoor or indoor applications ^Efficiency
85% typical at maximum load
• Suitable in standard electrical junction boxes
• Compact and lightweight
• Active PFC reduces power consumption
EMI filtering
Maximum power
Current Accuracy
Load regulation
47CFR, Part 2, Part 15 and Cispr PUB, 22 Class B
20W
±1% (when applicable)
±3%
ENVIRONMENTAL
Leakage Current 300uA typ.
Operating temperature:
-30 to 60 º C ^{Hold up time}
Half cycle minimum at 120 VAC and 80% of rated
(De-rating : 1% per º C from 60~70ºC )
load
Storage temperature:
-40 to +85º C ^Protection
Over-voltage, Over current and Short circuit
Humidity (Non-Condensing): 5% to 95%
protection: Auto-recovery
Cooling:
Convection
SAFETY
Vibration Frequency:
5 to 50 Hz
UL
MTBF: >100,000 Hours at full load and 25ºC _cUL
ambient conditions (MIL-217F)
CE
EMC : Compliant to 47CFR, Part 2, Part15 and
Cispr PUB, 22 Class B
UL1310, Class 2 and UL879 recognized
UL1310, Class 2 and UL879 recognized
Note: 52VDC output is not cUL recognized
Model Number
LP1020-52
LP1020-36
LP1020-24
LP1020-22
LP1020-18
LP1020-17
LP1020-15
LP1020-13
LP1020-12
LP1020-10
Constant Voltage Mode
Output
V (DC) A (mA) Watts
52, ±5%
400
20
36, ±5%
550
20
24, ±5%
830
20
22, ±5%
910
20
18, ±5%
1100
20
17, ±5%
1250
20
15, ±5%
1330
20
13, ±5%
1540
20
12, ±5%
1660
20
10, ±5%
2000
20
Constant Current Mode
Model Number
Output
V (DC) mA(Max.)
Watts
LP1020-52-Cxxxx 24~ 52 400, ±5%
20
LP1020-36-Cxxxx 18~ 36 550, ±5%
20
LP1020-24-Cxxxx 12~ 24 830, ±5%
20
LP1020-22-Cxxxx 12 ~ 22 910, ±5%
20
LP1020-18-Cxxxx 9 ~ 18 1100, ±5%
20
LP1020-17-Cxxxx 9 ~ 17 1250, ±5%
20
LP1020-15-Cxxxx 9 ~ 15 1330, ±5%
20
LP1020-13-Cxxxx 7 ~ 13 1540, ±5%
20
LP1020-12-Cxxxx 7 ~ 12 1660, ±5%
20
LP1020-10-Cxxxx 7 ~ 10 2000, ±5%
20
Note: The output current of Constant Current models are
adjustable at factory from 50% ~ 100%.
RECOMMEND APPLICATION SCHEMATICS
R
20W, 24VDC
LP1020 R
20W, 24VDC
LP1020-CC
This configuration is based on LED with the following parameters:
V_F: 3.0V ~ 3.5V I_F: 300mA ~ 350mA A. I_F: 300mA ~ 350mA
Recommended value for R is 20 ohm, 3W
INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:[phone] Fax: [phone] www.magtechind.com Anz095G