LP1017 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – LP1017

LED Driver
LP1017-xx Series
Switch-Mode LED Driver
Total Power
17 Watts
Input Voltages
90 ~ 264 VAC or 100-277VAC
Number of Outputs One
Product
Specifications
ANZ#: Z107f, May 18, 2009
SPECIAL FEATURES
ELECTRICAL SPECIFICATIONS
• UL48, Class 2 compliant
Input range
90 ~ 264 VAC, Full range or 100~277VAC
• Single output, constant current or constant
voltage design
• IP66 compliant
• Suitable for dry or damp locations
Frequency
Power Factor
Crest Factor
Inrush current
Input current
47 to 63 Hz
> 0.92 at full load, 115VAC
1.5 max.
10.0 Amps maximum at 230VAC, cold start, 25º C
0.3 Amps maximum at 115VAC
• Designed for outdoor or indoor applications ^Efficiency
82% typical at maximum load
• Convection cooled in plastic enclosure
• Compact, lightweight
• Active PFC reduces power consumption
EMI filtering
Maximum power
Current Accuracy
Load regulation
47CFR, Part 2, Part 15 and Cispr PUB, 22 Class B
17W
±1% (when applicable)
±3%
ENVIRONMENTAL
Leakage Current 300uA typ.
Operating temperature:
-30 to 60 º C ^{Hold up time}
Half cycle minimum at 120 VAC and 80% of rated
(De-rating : 1% per º C from 60~70ºC )
load
Storage temperature:
-40 to +85º C ^Protection
Over-voltage, Over current and Short circuit
Humidity (Non-Condensing): 5% to 95%
protection: Auto-recovery
Cooling:
Convection
SAFETY
Vibration Frequency:
5 to 50 Hz
UL
MTBF: >100,000 Hours at full load and 25ºC _cUL
ambient conditions (MIL-217F)
CE
EMC : Compliant to 47CFR, Part 2, Part15 and
UL48, Class 2 compliant
CUL48, Class 2 compliant
Cispr PUB, 22 Class B
Model Number
LP1017-36
LP1017-24
LP1017-12
Constant Voltage Mode
Output
V (DC) A (mA) Watts
36, ±5%
470
17
24, ±5%
700
17
12, ±5%
1400
17
Model Number
LP1017-36-C0470
LP1017-24-C0700
LP1017-12-C1400
Constant Current Mode
Output
V (DC) A (mA)
Watts
18~ 36 470, ±5%
17
12~ 24 700, ±5%
17
6 ~ 12 1400, ±5%
17
Note: The output current of Constant Current models are adjustable at factory from 50% ~ 100%.
The minimum load required is 40% for the Constant Voltage versions.
MECHANICAL DRAWING
0.87 [22.0]
8.43 [214.0]
0.16 [4.0]
0.49 [12.5]
R0.08 [R2.0]
7.87 [200.0]
8.27 [210.0]
0.98 [25.0]
0.25 [6.2]
INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:[phone] Fax: [phone] www.magtechind.com Anz107f