795-107-00-51 Datasheet, PDF (1/3 Pages) Marl International Limited – LED MODULES

DRAWING NO SHEET MODEL NAME ISSUE
SPL10010
1 OF 3
ASS9987
1
ISSUE MODIFICATION DRN DATE
1
ORIGINAL ISSUE
RW 04/01/2016
OVERVIEW
THE MARL 795 SERIES OFFERS AN EXTREMELY COMPETITIVE
REPLACEMENT TO TRADITIONAL HID AND SODIUM-DISCHARGE LAMPS
WITH AN INNOVATIVE MODULAR APPROACH TO FLOODLIGHTING AND
HIGHBAY LIGHTING SCHEMES.
THE MODULES CAN BE GROUPED AS A LUMINAIRE IN SINGLE, DOUBLE
OR TRIPLE CONFIGURATIONS AND CAN BE INDIVIDUALLY ANGLE
ADJUSTED TO GIVE THE DESIRED PHOTOMETRIC PERFORMANCE
WHERE THE LIGHT IS NEEDED. WITH A 30°FWHM BEAM T HE MODULES
CAN BE MOUNTED AT HEIGHTS GREATER THAN 10M WITH SUPERB LIGHT
DISTRIBUTION, COLOUR RENDERING AND PURE WHITE LIGHT.
UTILISING MULTI-FIN TECHNOLOGY FOR EXCEPTIONAL THERMAL
MANAGEMENT, EXTREME HIGH POWER (XHP) CREE LEDS, HIGH
EFFICIENCY OPTICS AND PSU ENABLES UNRIVALLED LUMEN
PERFORMANCE, RELIABILITY AND LOW LUMEN DEPRECIATION.
THE ULTRA-LONG LIFE POWER SUPPLY IS MOUNTED ON THE EXTERNAL
BRACKETRY IN FREE-AIR TO MAXIMISE HEAT DISSIPATION AND LONG
TERM RELIABILITY - GREATER THAN 4 TIMES THAT OF A CONVENTIONAL
SODIUM DISCHARGE LAMP.
ELECTRICAL
POWER CONSUMPTION: SEE TABLE
INPUT VOLTAGE: 90-305VAC
FREQUENCY: 47-63Hz
POWER FACTOR: >0.98/115VAC, >0.95/230VAC, >0.94/277VAC
INRUSH CURRENT MAX: COLD START 70A/230VAC
PROTECTION: OVER VOLTAGE / CURRENT / TEMPERATURE & S/C
AMBIENT OPERATING TEMPERATURE: -40ºC TO +50ºC
STORAGE TEMPERATURE: -40ºC TO +80ºC
COMPLIANCE TO WORLDWIDE SAFETY REGULATIONS FOR LIGHTING
OPTICAL
VIEWING ANGLE: 30°FWHM (FULL WIDTH AT HALF MAX) PE R MODULE
COLOUR TEMP:5000K
CRI: >80
LED: CREE XHP-50 (EXTREME HIGH POWER) X8 PER MODULE
MECHANICAL
IP RATING: IP66
GLASS: TEMPERED
HEATSINK MATERIAL: AL6063 +AL1050
BRACKET MATERIAL: SUS201
FIXINGS: STAINLESS STEEL
FINISH: BLACK ANODISED / BLACK PAINT
WEIGHT: 5KG / 8.8KG / 14 KG
CABLE SPEC: SJTW 18AWG X3C
FIXING
REAR BRACKETRY ALLOWS
FOR MULTIPLE FIXING POINTS.
*USE SAFETY CHAIN WHERE
REQUIRED
SEE SHEET 3 OF 3
WALL, POLE OR CHAIN
MOUNTING POSSIBLE.
MARL 795 SERIES
LED MODULES
MARL PART N°
795-107-00-51
795-107-00-52
795-107-00-53
CONFIGURATION
SINGLE
TWIN
TRIPLE
LUMINOUS FLUX
(LUMENS)
8,100
15,700
26,500
POWER
CONSUMPTION
(WATTS)
95
175
305
Marl International Limited
Marl Business Park
Ulverston
Cumbria
LA12 9BN
t: [phone]
f: [phone]
e: [e-mail]
w: www.leds.co.uk
FEATURES
• CREE XHP-50 LEDS
• HIGH CRI (MIN 80)
• HIGH FLUX DENSITY
• PURE WHITE LIGHT
• MULTI-FIN COOLING
• LONG LIFE >70,000 HRS
• IP66 INGRESS PROTECTION
• MODULAR APPROACH
• ANGLE ADJUSTABLE
• FLEXIBLE MOUNTING
• REDUCED ENERGY
• REDUCED MAINTENANCE
• MINIMAL GLARE
• IMPROVED SAFETY
• VISUAL PERFORMANCE
• 100% RECYCLABLE
TOLERANCE/ SCALE UOS
LINEAR
±0.1
ANGULAR
±1°
ORIGINAL SCALE 1:1
ALL DIMENSIONS
IN MM
DRN: RW
DATE:04/01/16
CHK1:GR
CHK2:MH
15/01/16
© MARL INTERNATIONAL LIMITED 2015 THIS DRAWING AND COPYRIGHT THEREIN BELONGS TO MARL INTERNATIONAL LIMITED AND MUST NOT BE COPIED OR DISCLOSED
TO A THIRD PARTY WITHOUT THE PRIOR WRITTEN CONSENT OF MARL INTERNATIONAL LIMITED