696 Datasheet, PDF (1/4 Pages) Marl International Limited – Ø6.1mm mounting Black anodised aluminium housing

696 series
features
specifications
• Ø6.1mm mounting
• Black anodised aluminium housing
• Counter sunk mounting for flush styling
• Sealed to IP67 & vandal resistant
• Colour diffused lens with a wide viewing angle
• Internal reverse protection diode fitted as standard in all
voltage models
• Pack Quantity = 10 Pieces
Typical characteristics (Ta = 25°C)
Part
Number
Colour
Voltage
Vac/dc
696-301-21
Red
12 Vdc
Current
DC
(mA)
20
Luminous
Intensity
(mcd)
39
Wave
Length
(nm)
660
Operating
Temp.
(°C)
-40 - +85
Storage
Temp.
(°C)
-40 - +85
De-rating
Graphs
A
696-325-21
Yellow
12 Vdc
20
87
590
-40 - +100 -40 - +120
Y
696-324-21
Green
12 Vdc
20
576
523
-30 - +85 -40 - +100
R
696-934-21
Blue
12 Vdc
20
128
468
-30 - +85 -40 - +100
R
696-998-21
White
12 Vdc
20
414 * See below -30 - +85 -40 - +100
H
696-301-23
Red
24-28 Vdc 20
39
660
-40 - +85 -40 - +85
A
696-325-23
Yellow
24-28 Vdc 20
87
590
-40 - +100 -40 - +120
Y
696-324-23
Green
24-28 Vdc 20
576
523
-30 - +85 -40 - +100
R
696-934-23
Blue
24-28 Vdc 20
128
468
-30 - +85 -40 - +100
R
696-998-23
White
24-28 Vdc 20
414 * See below -30 - +85 -40 - +100
H
998F
*Typical emission colour White
x
0.287
0.283
0.330
0.330
y
0.295
0.305
0.360
0.339
- Intensities (lv) and colour shades of white (x, y co-ordinates) may vary between LEDs within a batch
- Products must be de-rated according to the de-rating information. Each de-rating graph refers to
specific LEDs. Please refer to graphs on page 3.
- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
to order
to order please contact us on: t: [phone]
f: [phone] e: [e-mail] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the
intention of providing information, which must not be copied or released to a third party without prior
written consent from marl international limited. the information provided does not constitute part of any
order or contract and should not be regarded as a representation relating to either products or service. no
responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right
to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 696 - version 2012-12-06-114100
BS EN ISO 9001:2008
approved manufacturer
page 1 of 4