692 Datasheet, PDF (1/4 Pages) Marl International Limited – Ø12.7mm mounting Black anodised aluminium housing

692 series
features
specifications
• Ø12.7mm mounting
• Black anodised aluminium housing
• Flame retardant flying lead options
• Sealed to IP67
• Colour diffused lens
• Fully internally potted to resist shock and vibration
• Internal reverse protection diode fitted as standard
• Pack Quantity = 10 Pieces
Typical characteristics (Ta = 25°C)
Part
Number
Colour
Voltage
Vac/dc
692-501-21
Red
12 Vdc
Current
DC
(mA)
20
Luminous
Intensity
(mcd)
600
Wave
Length
(nm)
630
Operating
Temp.
(°C)
-40 - +80
Storage
Temp.
(°C)
-40 - +100
De-rating
Graphs
D
692-521-21
12 Vdc
20
-
692-532-21
Green
12 Vdc
20
800
515
-40 - +80 -40 - +100
F
692-930-21
Blue
12 Vdc
20
140
465
-30 - +85 -40 - +100
U
692-997-21
White
12 Vdc
20
1600 * See below -20 - +75 -30 - +80
Q
692-501-23
Red
24 - 28 Vdc 20
600
630
-40 - +80 -40 - +100
D
692-521-23
24 - 28 Vdc 20
-
692-532-23
Green
24 - 28 Vdc 20
800
515
-40 - +80 -40 - +100
F
997F-L
*Typical emission colour White
x
0.3130
-
-
-
y
0.3290
-
-
-
- Intensities (lv) and colour shades of white (x, y co-ordinates) may vary between LEDs within a batch
- Products must be de-rated according to the de-rating information. Each de-rating graph refers to
specific LEDs. Please refer to graphs on page 3.
- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
to order
to order please contact us on: t: [phone]
f: [phone] e: [e-mail] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the
intention of providing information, which must not be copied or released to a third party without prior
written consent from marl international limited. the information provided does not constitute part of any
order or contract and should not be regarded as a representation relating to either products or service. no
responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right
to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 692 - version 2012-12-06-114052
BS EN ISO 9001:2008
approved manufacturer
page 1 of 4