675 Datasheet, PDF (1/4 Pages) Littelfuse – Axial Lead and Cartridge Fuses - Ceramic Body

675 series
features
specifications
• Ø12.7mm Mounting
• RIA 12 approved, spike and transient protected with a
reverse protection diode
• Black anodised aluminium housing, sealed to IP67
• Silver plated brass termination tags
• Internally potted for use in high vibration applications
• Smoked lens for high on/ off contrast ratio
• Pack Quantity = 10 Pieces
Typical characteristics (Ta = 25°C)
Part
Number
Colour
Voltage
Vac/dc
675-501-00-50
Red
70 Vdc
Current
DC
(mA)
12
Luminous
Intensity
(mcd)
600
Wave
Length
(nm)
630
Operating
Temp.
(°C)
-40 - +80
Storage
Temp.
(°C)
-40 - +100
De-rating
Graphs
D
- Products must be de-rated according to the de-rating information. Each de-rating graph refers to
specific LEDs. Please refer to graphs on page 3.
- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
to order
to order please contact us on: t: [phone]
f: [phone] e: [e-mail] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the
intention of providing information, which must not be copied or released to a third party without prior
written consent from marl international limited. the information provided does not constitute part of any
order or contract and should not be regarded as a representation relating to either products or service. no
responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right
to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 675 - version 2012-12-06-114017
BS EN ISO 9001:2008
approved manufacturer
page 1 of 4