665 Datasheet, PDF (1/4 Pages) Littelfuse – Axial Lead and Cartridge Fuses - Subminiature

665 series
features
specifications
• Ø8.5mm mounting
• Hard black anodised aluminium housing
• Short body length is ideal for portable equipment
• Unique hexagonal bezel to aid mounting to panel
• Unique PTFE mounting/ panel seal
• Sealed to IP68 (10psi)to BS5420
• Ideal for marine amd high vibration applications
• Pack Quantity = 10 Pieces
Typical characteristics (Ta = 25°C)
Part
Number
Colour
Voltage
Vac/dc
665-501-04-50
Red
2.0 Vdc
Current
DC
(mA)
20
Luminous
Intensity
(mcd)
600
Wave
Length
(nm)
630
Operating
Temp.
(°C)
-40 - +80
Storage
Temp.
(°C)
-40 - +100
De-rating
Graphs
D
665-521-04-50
Yellow
2.1 Vdc
20
600
585
-40 - +80 -40 - +100
D
665-532-04-50
Green
3.4 Vdc
20
800
515
-40 - +80 -40 - +100
F
665-930-04-50
Blue
3.4 Vdc
20
140
465
-30 - +85 -40 - +100
U
665-997-04-50
White
3.4 Vdc
20
27000 * See below -30 - +85 -40 - +100
I
997F-C
*Typical emission colour White
x
0.31
-
-
-
y
0.32
-
-
-
- Intensities (lv) and colour shades of white (x, y co-ordinates) may vary between LEDs within a batch
- Products must be de-rated according to the de-rating information. Each de-rating graph refers to
specific LEDs. Please refer to graphs on page 3.
- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
to order
to order please contact us on: t: [phone]
f: [phone] e: [e-mail] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the
intention of providing information, which must not be copied or released to a third party without prior
written consent from marl international limited. the information provided does not constitute part of any
order or contract and should not be regarded as a representation relating to either products or service. no
responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right
to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 665 - version 2012-12-06-113949
BS EN ISO 9001:2008
approved manufacturer
page 1 of 4