665-501-04-50 Datasheet, PDF (1/3 Pages) Marl International Limited – PROFESSIONAL LED INDICATORS Ø8.5mm Mounting

PROFESSIONAL LED INDICATORS Ø8.5mm Mounting
665 SERIES
PACK QUANTITY = 10 PIECES
FEATURES
Hard black anodised aluminium housing
Short body length is ideal for portable equipment
Unique hexagon bezel to aid mounting to panel
Unique PTFE mounting/panel seal
Sealed to IP68 (10psi) to BS5420
Suitable for high vibration applications
Ideal for marine applications
SPECIFICATION
Ordering Information & Typical Technical Characteristics (Ta = 25°C)
Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
PART NUMBER
COLOUR
LENS
VOLTAGE
DC (Vdc)
Vopr
CURRENT
DC (mA)
lopr
LUMINOUS
WAVE
INTENSITY
LENGTH
lv@20mA (mcd) λp (nm)
OPERATING
TEMP
Topr
STORAGE
TEMP
Tstg
HIGH INTENSITY
665-501-04-50
Red
665-521-04-50
Yellow
665-532-04-50
Green
665-930-04-50
Blue
665-997-04-50
Cool White
UNITS
Colour Diffused 2.0
Colour Diffused 2.1
Colour Diffused 3.4
Colour Diffused 3.4
Colour Diffused 3.4
Vdc
20
20
20
20
20
mA
11000
16000
23000
7000
14000
mcd
643
-40 ~ +95^
591
-40 ~ +95^
527
-40 ~ +95^
470
-40 ~ +95^
*see below -40 ~ +95^
nm
°C
-40 ~ +100
Yes
-40 ~ +100
Yes
-40 ~ +100
Yes
-40 ~ +100
Yes
-40 ~ +100
Yes
°C
^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs.
Appropriate LED numbers shown - Refer to page 3
997F-C *Typical emission colour cool white
x
0.245 0.361 0.356 0.264
y
0.229 0.385 0.351 0.220
Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch.
How to Order:
website: www.marl.co.uk _• email: [e-mail] _•
• ^{Telephone [phone]} • ^{Fax: [phone]}
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
© MARL INTERNATIONAL LTD 2007 : DS 024/07 Issue 1
SAMPLES AVAILABLE
BS EN ISO 9001:2000
Approved Manufacturer
Page 1 of 3