612-301-21_15 Datasheet, PDF (1/5 Pages) Marl International Limited – Smoked lens

612 series
features
specifications
• Ø6.35mm mounting
• Black anodised aluminium housing, sealed to IP67
• Internal reverse protection diode fitted as standard in all
voltage models
• Smoked lens
• Flying lead terminations available
• Ideal for high vibration applications
• Pack Quantity = 10 Pieces
Typical characteristics (Ta = 25°C)
Part
Number
Colour
Voltage
Vac/dc
612-301-21
Red
12 Vdc
Current
DC
(mA)
20
Luminous
Intensity
(mcd)
900
Wave
Length
(nm)
660
Operating
Temp.
(°C)
-40 - +85
Storage
Temp.
(°C)
-40 - +85
De-rating
Graphs
A
612-325-21
Yellow
12 Vdc
20
3500
590
-40 - +100 -40 - +120
Y
612-324-21
Green
12 Vdc
20
36000
523
-30 - +85 -40 - +100
R
612-934-21
Blue
12 Vdc
20
7485
468
-30 - +85 -40 - +100
R
612-301-23
Red
24-28 Vdc 20
900
660
-40 - +85 -40 - +85
A
612-325-23
Yellow
24-28 Vdc 20
3500
590
-40 - +100 -40 - +120
Y
612-324-23
Green
24-28 Vdc 20
36000
523
-30 - +85 -40 - +100
R
612-998-23
White
24-28 Vdc 20
12900 * See below -30 - +85 -40 - +100
H
998
*Typical emission colour White
x
0.287
0.283
0.330
0.330
y
0.295
0.305
0.360
0.339
^ = Voltage for 20mA product is Vf at 20mA, not Vopr
- Products must be de-rated according to the de-rating information. Each de-rating graph refers to
specific LEDs. Please refer to graphs on page 3.
- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
- Intensities (lv) and colour shades of white (x, y co-ordinates) may vary between LEDs within a batch
to order
to order please contact us on: t: [phone]
f: [phone] e: [e-mail] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the
intention of providing information, which must not be copied or released to a third party without prior
written consent from marl international limited. the information provided does not constitute part of any
order or contract and should not be regarded as a representation relating to either products or service. no
responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right
to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 612 - version 2013-09-24-173450
BS EN ISO 9001:2008
approved manufacturer
page 1 of 5