515-501-04_15 Datasheet, PDF (1/5 Pages) Marl International Limited – Colour diffused lens

515 series
features
specifications
• Ø12.7mm mounting
• Robust bright nickel plated brass housing
• Atex approved to EN50028 (EN50014)
• Sealed to IP67
• Colour diffused lens
• Wide viewing angle
• Suitable for high vibration applications
• Pack Quantity = 10 Pieces
Typical characteristics (Ta = 25°C)
Part
Number
Colour
Voltage
Vac/dc
515-501-04
Red
2.6 Vdc
Current
DC
(mA)
20
Luminous
Intensity
(mcd)
2800
Wave
Length
(nm)
660
Operating
Temp.
(°C)
-40 - +85
Storage
Temp.
(°C)
-40 - +85
De-rating
Graphs
A
515-521-04
Yellow
2.8 Vdc
20
6100
580-590 -40 - +80 -40 - +120
D
515-532-04
Green
4.1 Vdc
20
34700
525
-30 - +85 -40 - +100
D
515-930-04
Blue
4.1 Vdc
20
9870
468
-30 - +85 -40 - +100
U
515-997-04
White
4.1 Vdc
20
27000 * See below -30 - +85 -40 - +100
I
997
*Typical emission colour White
x
0.4255 0.4390 0.4680 0.4519
y
0.4000 0.4310 0.4385 0.4086
^ = Voltage for 20mA product is Vf at 20mA, not Vopr
- Products must be de-rated according to the de-rating information. Each de-rating graph refers to
specific LEDs. Please refer to graphs on page 3.
- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
- Intensities (lv) and colour shades of white (x, y co-ordinates) may vary between LEDs within a batch
to order
to order please contact us on: t: [phone]
f: [phone] e: [e-mail] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the
intention of providing information, which must not be copied or released to a third party without prior
written consent from marl international limited. the information provided does not constitute part of any
order or contract and should not be regarded as a representation relating to either products or service. no
responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right
to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 515 - version 2013-09-24-173349
BS EN ISO 9001:2008
approved manufacturer
page 1 of 5