218-501-22-65 Datasheet, PDF (1/3 Pages) Marl International Limited – FILAMENT REPLACEMENT LEDs - Multi-LED Cluster

FILAMENT REPLACEMENT LEDs - Multi-LED Cluster
218 SERIES
PACK QUANTITY = 1 PIECE
FEATURES
Direct replacement for E26 (North American Standard)
20 LED Cluster
BA22 (UK) and E27 (Europe) versions also available
Optional polycarbonate lens
SPECIFICATIONS
Ordering Information & Typical Technical Characteristics (Ta = 25°C)
Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
PART NUMBER
COLOUR
LENS
VOLTAGE
AC/DC
Vopr
CURRENT
DC
lopr
LUMINOUS
INTENSITY
lv@20mA
WAVE
LENGTH
λp
OPERATING
TEMP
Topr
STORAGE
TEMP
Tstg
HIGH INTENSITY
218-501-22-65
Red
218-521-22-65
Yellow
218-532-22-65
Green
218-930-22-65
Blue
218-997-22-65
Cool White
218-501-75-65
Red
218-521-75-65
Yellow
218-532-75-65
Green
218-930-75-65
Blue
218-997-75-65
Cool White
UNITS
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
24 Vdc
24 Vdc
24 Vdc
24 Vdc
24 Vdc
110 Vac
110 Vac
110 Vac
110 Vac
110 Vac
75
75
75
75
75
22
22
22
22
22
mA
11000
16000
23000
7000
14000
11000
16000
23000
7000
14000
mcd
643
-40 ~ +95^
591
-40 ~ +95^
527
-40 ~ +95^
470
-40 ~ +95^
*See below -40 ~ +95^
643
-40 ~ +95^
591
-40 ~ +95^
527
-40 ~ +95^
470
-40 ~ +95^
*See below -40 ~ +95^
nm
0_C
-40 ~ +100
Yes
-40 ~ +100
Yes
-40 ~ +100
Yes
-40 ~ +100
Yes
-40 ~ +100
Yes
-40 ~ +100
Yes
-40 ~ +100
Yes
-40 ~ +100
Yes
-40 ~ +100
Yes
-40 ~ +100
0_C
Yes
997
x
y
*Typical emission colour cool white
0.296 0.283
0.330
0.330
0.276 0.305
0.360
0.318
^ = Products must be derated according to the derating information. Each derating graph refers to
specific LEDs. Appropriate LED numbers shown. - Refer to page 3.
Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch.
How to Order:
website: www.marl.co.uk _• email: [e-mail]
• ^{Telephone [phone]} • ^{Fax: [phone]}
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
© MARL INTERNATIONAL LTD 2008 : DS 008/08 Issue 1
Page 1 of 3