215-993-84-38 Datasheet, PDF (1/2 Pages) Marl International Limited – FILAMENT REPLACEMENT LEDs - T3¼ BA9s

FILAMENT REPLACEMENT LEDs - T3¼ BA9s
FEATURES
215 SERIES
PACK QUANTITY = 20 PIECES
Direct replacement for T3¼ BA9s
Flat-topped for enhanced, even illumination of large
lens areas
Reverse polarity options availability
Ideal for industrial pushbutton switches
DC Versions available
Warm White LEDs may be used behind coloured lens as a true
replacement for a filament lamp.
SPECIFICATIONS
Ordering Information & Typical Technical Characteristics (Ta = 25°C)
Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
PART NUMBER
COLOUR
LENS
VOLTAGE
DC
Vopr
CURRENT
DC
lopr
LUMINOUS
INTENSITY
lv@20mA
WAVE
LENGTH
λp
OPERATING
TEMP
Topr
STORAGE
TEMP
Tstg
215-993-84-38
Warm White
UNITS
HIGH INTENSITY
Water Clear
130
Vac
4
mA
9200
mcd
*
nm
993
x
y
*Typical emission colour warm white
0.426 0.439
0.497
0.477
0.400 0.431
0.446
0.413
Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch.
-30 ~ +85^
0_C
-40 ~ +100
0_C
Yes
993
^ = Products must be derated according to the derating
information. Each derating graph refers to specific LEDs.
How to Order:
website: www.marl.co.uk _• email: [e-mail] _•
• ^{Telephone [phone]} • ^{Fax: [phone]}
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International Limited reserve the right to alter without notice the specification or any conditions of supply
for products or service.
© MARL INTERNATIONAL LTD 2007 : DS 004/07 Issue 1
SAMPLES AVAILABLE
Page 1 of 2