214-501-23-50_1 Datasheet, PDF (1/2 Pages) Marl International Limited – FILAMENT REPLACEMENT LEDs - BA9s

FILAMENT REPLACEMENT LEDs - BA9s
FEATURES
214 SERIES
PACK QUANTITY = 20 PIECES
Designed to meet RIA12 specifications
Direct replacement for T3¼ BA9s incandescent
Durable to shock and vibration
Centre contact is Anode (Centre contact Cathode is
also available)
AC Versions available
Other colours available
SPECIFICATIONS
Ordering Information & Typical Technical Characteristics (Ta = 25°C)
Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
PART NUMBER
COLOUR
LENS
VOLTAGE
DC
Vopr
CURRENT
DC
lopr
LUMINOUS
INTENSITY
lv@20mA
WAVE
LENGTH
λp
OPERATING
TEMP
Topr
STORAGE
TEMP
Tstg
214-501-23-50
Red
214-521-23-50
Yellow
214-532-23-50
Green
UNITS
HIGH INTENSITY
Water Clear
Water Clear
Water Clear
28
28
28
Vdc
14
14
14
mA
11000
16000
23000
mcd
624
591
527
nm
-40 ~ +95^
-40 ~ +95^
-40 ~ +95^
0_C
-40 ~ +100
Yes
-40 ~ +100
Yes
-40 ~ +100
0_C
Yes
Please note that this product is also available in different voltages. Contact our sales department
for further details.
fig 1
^ = Products must be derated when used above 45°C - Refer to fig 1.
Warm White LEDs may be used behind coloured lens as a true replacement for a filament lamp.
Max forward DC current vs ambient
temperature (Tjmax=105°C)
How to Order:
website: www.marl.co.uk _• email: [e-mail] _• webstore: www.leds.co.uk
• ^{Telephone [phone]} • ^{Fax: [phone]}
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
© MARL INTERNATIONAL LTD 2006 : DS 061/06 Issue 1
SAMPLES AVAILABLE
Page 1 of 2