208 Datasheet, PDF (1/5 Pages) Littelfuse – Axial Lead & Cartridge Fuses

208 series
features
• Direct replacement for T6.8 Slide Base
• Flat topped for enhanced, even illumination of large lens
areas
• Water clear lens
• Durable to shock and vibration
• Ideal for industrial pushbutton switches and annunciator
panels
specifications
• Pack Quantity = 20 Pieces
Ordering information and typical characteristics (Ta = 25°C)
Part
Number
Colour
Voltage
Vac/dc
Current Luminous
DC
Intensity
(mA)
(mcd)
208-501-21-38
Red
12 Vdc
20
600
Wave
Length
(nm)
630
Operating
Temp.
(°C)
-40 - +80
Storage
Temp.
(°C)
-40 - +100
De-rating
Graphs
D
208-521-21-38
Yellow
12 Vdc
20
600
585
-40 - +80 -40 - +100
D
208-532-21-38
Green
12 Vdc
20
800
515
-40 - +80 -40 - +100
F
208-930-21-38
Blue
12 Vdc
20
140
465
-30 - +85 -40 - +100
U
208-997-21-38
White
12 Vdc
20
27000 * See below -30 - +85 -40 - +100
I
208-993-21-38 Warm White
12 Vdc
20
Call * See below -30 - +85 -40 - +100
I
208-501-23-38
Red
24-28 Vdc 20
600
630
-40 - +80 -40 - +100
D
208-521-23-38
Yellow
24-28 Vdc 20
600
585
-40 - +80 -40 - +100
D
208-532-23-38
Green
24-28 Vdc 20
800
515
-40 - +80 -40 - +100
F
208-930-23-38
Blue
24 - 28 Vdc 20
140
465
-30 - +85 -40 - +100
U
208-997-23-38
White
24-28 Vdc 20
27000 * See below -30 - +85 -40 - +100
I
208-993-23-38 Warm White 24-28 Vdc 20
Call * See below -30 - +85 -40 - +100
I
* = Voltage for 20mA product is Vf at 20mA, not Vopr
- Products must be de-rated according to the de-rating information. Each de-rating graph refers to
specific LEDs. Please refer to graphs on page 2.
- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
to order
to order please contact us on: t: [phone]
f: [phone] e: [e-mail] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the
intention of providing information, which must not be copied or released to a third party without prior
written consent from marl international limited. the information provided does not constitute part of any
order or contract and should not be regarded as a representation relating to either products or service. no
responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right
to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 208 - version 2012-12-06-113449
BS EN ISO 9001:2008
approved manufacturer
page 1 of 5