206 Datasheet, PDF (1/5 Pages) CTS Corporation – Multifunctional through hole DIP switches

206 series
features
• Direct replacement for T1 ¾ Midget Flange SX6s
• Reverse polarity options available
• Water clear lens
• ‘Fit and Forget’ reliability
• Centre contact Anode as standard
• Warm white LEDs may be used behind coloured lens as a
true replacement for a filament lamp
specifications
• Pack Quantity = 20 Pieces
Ordering information and typical characteristics (Ta = 25°C)
Part
Number
Colour
Voltage
Vac/dc
Current Luminous
DC
Intensity
(mA)
(mcd)
206-501-21-38
Red
12 Vdc
10
600
Wave
Length
(nm)
630
Operating
Temp.
(°C)
-40 - +80
Storage
Temp.
(°C)
-40 - +100
De-rating
Graphs
D
206-521-21-38
Yellow
12 Vdc
10
600
585
-40 - +80 -40 - +100
D
206-532-21-38
Green
12 Vdc
10
800
515
-40 - +80 -40 - +100
F
206-930-21-38
Blue
12 Vdc
10
140
465
-30 - +85 -40 - +100
U
206-997-21-38
White
12 Vdc
10
27000 * See below -30 - +85 -40 - +100
I
206-993-21-38 Warm White
12 Vdc
10
Call * See below -30 - +85 -40 - +100
I
206-501-23-38
Red
28 Vdc
8
600
630
-40 - +80 -40 - +100
D
206-521-23-38
Yellow
28 Vdc
8
600
585
-40 - +80 -40 - +100
D
206-532-23-38
Green
28 Vdc
8
800
515
-40 - +80 -40 - +100
F
206-930-23-38
Blue
28 Vdc
8
140
465
-30 - +85 -40 - +100
U
206-997-23-38
White
28 Vdc
8
27000 * See below -30 - +85 -40 - +100
I
206-993-23-38 Warm White
28 Vdc
8
Call * See below -30 - +85 -40 - +100
I
* = Voltage for 20mA product is Vf at 20mA, not Vopr
- Products must be de-rated according to the de-rating information. Each de-rating graph refers to
specific LEDs. Please refer to graphs on page 2.
- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
to order
to order please contact us on: t: [phone]
f: [phone] e: [e-mail] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the
intention of providing information, which must not be copied or released to a third party without prior
written consent from marl international limited. the information provided does not constitute part of any
order or contract and should not be regarded as a representation relating to either products or service. no
responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right
to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 206 - version 2013-03-07-173200
BS EN ISO 9001:2008
approved manufacturer
page 1 of 5