C512A_15 Datasheet, PDF (8/10 Pages) Marktech Corporate – 5mm Round LED

Cree 5-mm Round LED
C512A-WNS/WNN
MECHANICAL DIMENSIONS
All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Burr around bottom of epoxy may be 0.5 mm max.
C512A-WNS:
C512A-WNN:
NOTES
RoHS Compliance
The levels of environmentally sensitive,
wise restricted materials in this product
persistent
are below
bthioelomgaicxailmlyutmo_ xcicon(PceBnTt)r,aptieornsisvtaelunet _{sor(gaalsnoicrepfoelrluretadnttos}
(POP), or other-
as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
oCfopCyrerieg,hItn©c. ^{2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.}
8