C503B-AAS_15 Datasheet, PDF (7/9 Pages) Marktech Corporate – 5mm Amber Round LED

Mechanical Dimensions
All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Burr around bottom of epoxy may be 0.5 mm max.
C503B-AAS-015:
C503B-AAN-015:
C503B-ACN-030:
C503B-ACS-030:







 _Notes



 ^{RoHS Compliance}

 ^{The levels of environmentally sensitive, persistent biolog}^{ically toxic (PBT), persistent organic pollutants (POP), or}
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
 _{threshold limits) permitted for such substances, or are u}_{sed in an exempted application, in accordance with EU Direc-}

tive 2002/95/EC on the restriction
(RoHS), as amended through April
of the use
21, 2006.
of
certain
h_ azardous
substances
in
electrical
and
electronic
equipment


Vision Advisory Claim


 ^{Users should be cautioned not to stare at the light of thi}^{s LED product. The bright light can damage the eye.}






 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.

7
CLD-CT1213.000

Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]
Fax: [phone]
www.cree.com/ledlamps