LO566EBL3-70G-A3-MT Datasheet, PDF (2/5 Pages) Marktech Corporate – 5-mm Oval LED

Standard Bins for LO566EBL3-70G-A3-MT (I_F = 20 mA)
Lamps are sorted to luminous intensity (I_V) and dominant wavelength (λ_D) bins shown.
Orders for LO566EBL3-70G-A3-MT may be filled with any or all bins contained as below.
All luminous intensity (I_V) and dominant wavelength (λ_D) values shown and specified are at I_F = 20 mA.
X4
X5
2130 mcd
1520 mcd
1100 mcd
770 mcd

550 mcd
465 nm
470 nm
Dominant Wavelength (λ_D)
Forward Voltage (VF)
Rank
Voltage
V7
2.8-3.0V
V8
3.0-3.2V
V9
3.2-3.4V
*Majority VF bins are highlighted in Yellow
V or
above
U
T
S
R
475 nm
V10
3.4-3.6V
V11
3.6-3.8V
V12
3.8-4.0V
Important Notes:
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.
2. Pb content <1000 ppm.
3. Tolerance of measurement of luminous intensity is ±15%.
4. Tolerance of measurement of dominant wavelength is ±1 nm.
5. Tolerance of measurement of V_F is ±0.05 V.
6. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” docu-
ment.
7. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
8. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT532.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]
www.cree.com/ledlamps