TC62D723FNAG Datasheet, PDF (18/44 Pages) Toshiba Semiconductor – 16-Output constant current LED driver with the output gain control function and the PWM grayscale function

8-7-3) Details of each setting
TC62D723FNAG
C setting (Setting of thermal shutdown function (TSD))
C[0]
Setting
0
Thermal shutdown function becomes active. (Default)
1
Thermal shutdown function becomes not active.
D setting (Setting of PWMCLK open detection function (POD))
D[0]
Setting
PWMCLK open detection function becomes active. (Default)
When it was the state that a PWMCLK signal isn't input by breaking of wiring, it's the
function which prevents PWM output keeping stopping by on state.
0
When PWMCLK is not inputted for about 1 second after it is inputted even once, all
output is turned off compulsorily.
Output compulsion off is released by the initialization function of S5 command.
In addition, the output compulsion off is removed by inputting PWMCLK again.
1
PWMCLK open detection function becomes not active.
E setting (Setting of output open detection function (OOD))
E[0]
Setting
0
Output open detection function becomes not active. (Default)
1
Output open detection function becomes active.
F setting (Setting of output short detection function (OSD))
F[0]
Setting
0
Output short detection function becomes not active. (Default)
1
Output short detection function becomes active.
G setting (Setting of PWM output synchronization)
G[0]
Setting
0
PWM output synchronous mode. (Default)
1
PWM output asynchronous mode.
I setting (Setting of PWM output system)
I[0]
0
Normal PWM output mode. (Default)
1
Division PWM output mode.
Setting
18
2012-01-30