5764501 Datasheet, PDF (3/4 Pages) Mallory performance club – MAGNETIC BREAKERLESS DISTRIBUTOR

FIGURE 1 WIRING DIAGRAM USING OEM PRIMARY (LOOM) RESISTANCE WIRE
ALL OTHER WIRES ORIGINALLY CONNECTED TO THE COIL (+) TERMINAL
12V/IGNITION
SWITCH
DISTRIBUTOR WIRE HARNESS PART NO. 29349
LOOM RESISTANCE WIRE
RED
IGNITION MODULE
FEMALE CONNECTOR
ENGINE
GROUND
BROWN
GREEN
NOTE: The purpose of resistance wire between the ignition
switch (12V) and the ignition coil positive terminal is to restrict
current flow through the ignition coil. Failure to use resistance
wire will eventually destroy the Ignition Module.
EXCEPTION: If your vehicle is equipped with a HYFIRE^® Electronic
Ignition Control or similar aftermarket ignition control, use the
wiring procedures stated in the instructions included with the
ignition control.
To prevent false triggering and possi-
ble premature ignition failure, you
must use suppression type (carbon
core, spiral core, or radio suppression
core) spark plug wire.
Do not use solid core (copper core or
stainless steel core) spark plug wire
with any electronic ignition system.
FIGURE 2 WIRING DIAGRAM USING IGNITION BALLAST RESISTOR
ALL OTHER WIRES ORIGINALLY CONNECTED TO THE COIL (+) TERMINAL
12V/IGNITION
SWITCH
IGNITION BALLAST RESISTOR
RED
DISTRIBUTOR WIRE HARNESS PART NO. 29349
IGNITION MODULE
FEMALE CONNECTOR
ENGINE
GROUND
BROWN
GREEN
NOTE: The purpose of an ignition ballast resistor between the
ignition switch (12V) and the ignition coil positive terminal is to
restrict current flow through the ignition coil. Failure to use an
ignition ballast resistor will eventually destroy the Ignition
Module.
EXCEPTION: If your vehicle is equipped with a HYFIRE^® Electronic
Ignition Control or similar aftermarket ignition control, use the
wiring procedures stated in the instructions included with the
ignition control.
To prevent false triggering and possi-
ble premature ignition failure, you
must use suppression type (carbon
core, spiral core, or radio suppression
core) spark plug wire.
Do not use solid core (copper core or
stainless steel core) spark plug wire
with any electronic ignition system.
3
www.malloryracing.com
MALLORY IGNITION