PN65303 Datasheet, PDF (10/20 Pages) Mallory performance club – Programmable 6AL-2 Ignition Control

10
INSTALLATION INSTRUCTIONS
PROGRAMMABLE FEATURES
The following explains the programmable features of the PN 6530 Ignition. These instructions serve
as an overview of the features and their operation. The Pro-Data+ software also has a Help Menu
that explains many features in great detail. The features are listed in the same order that they show
on the Data Editor list in the software.
Note: If you are programming the timing functions of the ignition, the distributor will require being
locked-out.
STATS
Stat 1: This is only used with the Hand Held Monitor, PN 7550.
REV LIMITS
Up to three different rev limits can be programmed in 100 rpm increments.
RevBurn: Burnout Rev Limit. This limit is activated when 12 volts are applied to the Light Blue
wire. It is adjustable from 2,000 to 12,500 rpm.
RevLaunch: Launch Rev Limit. This limit is activated when 12 volts are applied to the Dark Blue
wire. It is adjustable from 1,000 to 12,500 rpm.
RevMax: Max Speed Rev Limit. This is the over-rev limit and is active whenever the Launch and
Burnout limits are off.
HELP
MENU
REAL TIME
MONITOR
RUN RETARD CURVE
MENU
TREE
BOOST/RETARD MAP
GAUGES
Figure 10 Pro-Data+ Screen and Program Windows.
M S D  •  WWW.MSDPERFORMANCE.COM • [phone] • FAX [phone]