6425 Datasheet, PDF (10/20 Pages) Alpha Wire – CUSTOMER PRODUCT SPECIFICATION

10
INSTALLATION INSTRUCTIONS
  MSD SYSTEMS  Installing to Points/Amplifier Style Ignition.
FROM IGNITION KEY
(ORIGINAL COIL WIRE)
RED
FROM POINTS OR ELECTRONIC
IGNITION AMPLIFIER
(ORIGINAL COIL WIRE)
WHITE
ORANGE
BLACK
REV
LIMITER
DIGITAL 6AL
VIOLET (+) GREEN (-)
TACH OUTPUT
GRAY
NOTE: On dual point setups, it is recommended
to remove the trailing set of points.
NOTE: Ballast Resistor is not necessary.
MAGNETIC PICKUP
(NOT USED)
NOTE: Remove the coil terminal wires. The negative wire
connects to MSD White. The positive wire connects
to MSD Red. The MSD Orange connects to the
coil positive terminal, Black connects to the coil
negative terminal.
  MSD SYSTEMS  Installing to an MSD Distributor/Crank Trigger.
FROM IGNITION KEY
(ORIGINAL COIL WIRE)
(NOT USED)
RED
WHITE
ORANGE
BLACK
REV
LIMITER
DIGITAL 6AL
MAGNETIC
PICKUP
GRAY ^{TACH OUTPUT}
DISTRIBUTOR
DISTRIBUTOR
WITH
MAGNETIC PICKUP
PN 8860
HARNESS
GREEN
VIOLET
OR
MSD CRANK
TRIGGER WHEEL
M S D  •  WWW.MSDPERFORMANCE.COM • [phone] • FAX [phone]