PN8992 Datasheet, PDF (1/4 Pages) Mallory performance club – MSD Timing Light

MSD Timing Light
PN 8992
ONLINE PRODUCT REGISTRATION: Register your MSD product online. Registering your product
will help if there is ever a warranty issue with your product and helps the MSD R&D team create
new products that you ask for! Go to www.msdperformance.com/registration.
Parts Included:
1 - MSD Timing Light
1 - Cable Harness/Inductive Pickup
Note: Consult a service manual for your vehicle for information on vacuum connections and specific
timing procedures.
CONNECTING THE MSD TIMING LIGHT
1. Connect the inductive pickup to the timing light harness.
2. With the engine off, connect the Black clip to the negative (-) terminal on the battery. Connect the
Red clip to the positive (+) terminal on the battery. The voltage should be between 10-16 volts
(Figure 1).
3. Clamp the inductive pickup over the number 1 spark plug wire (See Figure 1). The position of the
inductive pickup does not matter but the wire must fit in the gap between the jaws of the pickup
(Figure 2). Do not pinch the wire between the end of the jaws. Consult your vehicle's service
manual to locate the number 1 cylinder on your engine.
TIMING LIGHT
SPARK PLUG
SIDE
TO NO.1 SPARK
PLUG LOCATION
ON VEHICLE
(CONSULT
VEHICLE MANUAL)
CABLE
HARNESS
RED
BLACK
Figure 1 Wiring.
M S D  •  WWW.MSDPERFORMANCE.COM • [phone] • FAX [phone]