PN62153 Datasheet, PDF (1/16 Pages) Mallory performance club – DIS-4 Plus HO

MSD DIS-2 Plus HO
PN 62113
DIS-4 Plus HO
PN 62153
ONLINE PRODUCT REGISTRATION: Register your MSD product online. Registering your product
will help if there is ever a warranty issue with your product and helps the MSD R&D team create
new products that you ask for! Go to www.msdperformance.com/registration.
The MSD Digital DIS-2 Plus HO Ignition can be used on 4-cylinder engines equipped with two dual output
coils. The DIS-4 Plus HO Ignition can be used on 4, 6 or 8-cylinder engines equipped with up to four dual
output coils. The Ignitions will accept trigger inputs from electronic distributorless type ignition systems.
Parts Included:
  1 - MSD DIS Ignition
12 - Connectors, Butt Splice
  1 - Cable Assembly
  1 - Bypass Plug
Parts not included but may be needed:
Ignition Adapter(s) PN 8912, PN 89121, PN 8917
Coil Interface Modules, PN 8870 for GM DIS Applications
Coil Interface Modules, PN 8879 for Saturn Applications
Cam Sync Adapter, PN 8914 for Saturn Applications
NOTE:  It is recommended that you have the Service Manual and wiring diagram for your vehicle
before beginning the installation of the MSD DIS Ignition.
WARNING: Before installing the Ignition, disconnect the battery cables. When disconnecting

the battery cables, always remove the Negative (-) cable first and install it last.
NOTES: 1. Solid Core spark plug wires cannot be used with an MSD DIS Ignition.

2. Vehicles originally equipped with a CD ignition cannot use an MSD DIS Ignition.

3. This ignition should be used for RACING ONLY, not for street use.
IMPORTANT
Read these instructions before attempting this installation!
TECHNICAL FEATURES - DIGITAL DIS-2 PLUS HO
TECHNICAL FEATURES - DIGITAL DIS-4 PLUS HO
Operating Voltage: 12-18 volts (neg. ground)
Operating Voltage: 12-18 volts (neg. ground)
Operating Current: 5.3 Amperes @ 10,000 RPM
Operating Current: 10 Amperes @ 10,000 RPM
RPM Capability:
14,000 RPM - 4-Cyl. @ 14 volts RPM Capability:
14,000 RPM - 4, 6, 8-Cyl. @ 14 volts
Ignition Inputs:
2 - DIS Type
Ignition Inputs:
2, 3, 4 - DIS Type
Ignition Outputs: 2 - DIS Type
Ignition Outputs:
2, 3, 4 - DIS Type
LED Indicator:
Ign. trigger, low battery voltage LED Indicator:
Ign. trigger, low battery voltage
Tach Output:
(+) 12 volt square wave, 40°
Tach Output:
(+) 12 volt square wave, 40°
Duration
Duration
Rev Limiter:
High RPM - Adjustable
Rev Limiter:
High RPM - Adjustable
Low RPM - Adjustable
Low RPM - Adjustable
Spark Duration:
20°- 4-Cyl. Max Sparks - 12
Spark Duration:
20°- 4, 6, 8-Cyl. Max Sparks - 12
Energy Output Max: 165-175 milliJoules per spark. Energy Output Max: 165-175 milliJoules per spark.
2100 milliJoules per sequence.
2100 milliJoules per sequence.
Output Voltage:
Primary (Into Coil): 460-480 volts Output Voltage:
Primary (Into Coil): 460-480 volts
Secondary: (w/stock coil)
Secondary: (w/stock coil)
43,000 volts
43,000 volts
Weight & Size:
3 lbs., 9.5"L x 4.5"W x 2.2"H
Weight & Size:
3 lbs., 9.5"L x 4.5"W x 2.2"H
M S D  •  WWW.MSDPERFORMANCE.COM • [phone] • FAX [phone]