PN4248 Datasheet, PDF (1/8 Pages) Micro Electronics – PNP SILICON AF LOW NOISE AMALL SIGNAL TRANSISTORS

MSD Blaster FI Fuel/Ignition Controller
PN 4248
Parts Included:
1 - Fuel/Ignition Controller
1 - Micro-USB Cable
1 - MSD View CD-Rom
WARNING: When installing the Blaster FI, disconnect the battery cables. When disconnecting,
always remove the negative cable first and re-install it last.
WARNING: The Blaster FI Controller is a performance device that allows the vehicle or engine
to operate at increased power and speed. Follow all OEM safety recommendations
and use extra care when operating at increased power and speed.
CAUTION: The Blaster FI Controller can raise the maximum rev/speed limit of the engine. Note
that factory components may not be designed for the increase in rpm and may
require modifications to achieve the best performance and durability.
Note: Do not plug the MSD into PC until the MSD View Software has been installed first.
INTRO
The Blaster FI system has been designed to install directly on Yamaha 700cc Raptors (Model year
2006 – 2011). This is an in-line (“piggy-back”) system that plugs directly in to the factory wiring
harnesses. Using the Blaster FI the Raptor can be retuned with custom maps for ignition timing and
fueling options. In all nine custom tunes can be created and saved to the device. A 10th tune remains
as a stock setting that cannot be edited.
MSD VIEW
The MSD View software controls all of the functionality of the Blaster. The following information gives a
brief explanation of each function or feature in the system as well as the settings that control it. While
using the program, hover the mouse over a Function to display a brief explanation.
When the system controller is connected to a PC via USB MSD View will automatically recognize it
and load the settings stored in it.
Note: Insure that MSD View is installed on the PC prior to connecting the Blaster FI.
® Registered Trademark of Bombardier Inc.
MSD POWERSPORTS • WWW.MSDPOWERSPORTS.COM • [phone] • FAX [phone]