6014CT Datasheet, PDF (1/8 Pages) Mallory performance club – MSD Circle Track LS Ignition Control

MSD Circle Track LS Ignition Control
PN 6014CT
ONLINE PRODUCT REGISTRATION: Register your MSD product online. Registering your product
will help if there is ever a warranty issue with your product and helps the MSD R&D team create
new products that you ask for! Go to www.msdperformance.com/registration.
Parts Included:
1 – Ignition Control, PN 6014CT
1 – Main Wiring Harness
1 – Sub Harness
1 – Crank/Cam Pigtail 24x/1x
1 – Crank/Cam Pigtail 58x/4x
1 – USB Cable
1 – Mounting Kit
1 – MSDView USB Flash Drive
WARNING: During installation, disconnect the battery cables. When disconnecting, always re-
move the negative cable first and install it last.
Note: Solid core spark plug wires cannot be used with an MSD Ignition Control.
OPERATION
The MSD 6014CT LS Ignition controller works with 24x/1x, 58x/4x and 58x/1x crank/cam configura-
tions. It auto detects the correct configuration based on the crankshaft reluctor wheel pattern, so
there is no need to select one. It provides a customizable timing plot that can be programmed via
MSDView.
Note: It is recommended, that you install and run MSDView software while connected to the unit to
perform the base settings. The unit can be powered via the USB cable, so this can be done
from a desktop or laptop and does not require an external power source.
M S D  •  WWW.MSDPERFORMANCE.COM • [phone] • FAX [phone]