MS-78-NZ Datasheet, PDF (3/3 Pages) Make-Ps – Single Output DC/DC Converter

www.make-ps.com
E-mail:[e-mail]
Standard Application Circuit
Vin
1
3
MS - 78XX- NZ
Vout
C1
10µF
GND
C2
2
100µF
GND
C1: A low ESR capacitor is required to keep the noise of the converter to a minimum.
Ceramic capacitors are recommended, but tantalum or electrolytic may be used. Typical value is 10µF / 50V.
C2: Installation of C2 is recommended but optional. Typical recommended value is 100µF / 25V electrolytic.
NOTE: This part is not designed for parallel operation
3 of 3