3000LP Datasheet, PDF (2/3 Pages) Make-Ps – Single, Dual, Triple Output DC/DC Converter

www.make-ps.com
E-mail:[e-mail]
ENVIRONMENTAL SPECIFICATIONS
Operating Temp. Range
Thermal Shutdown
Protection
Storage Temp. Range
Relative Humidity
Cooling
Min Typ Max Unit/Comments
-40
+75 ^oC; Ambient
+95
o_{C; Case Temp.}
-40
+125 ^oC
95 % Humidity; non-
condensing
Free-Air Convection
OUTLINE DRAWING
CASE G
2.56 (65.0)
0.40 0.40 0.40 0.50 0.30 0.30
(10.2) (10.2) (10.2) (12.7) (7.6) (7.6)
0.20 ^{0.040±.005}
(5.1)
(1.01)
DIA.
10 9 8 7 6 5
BOTTOM
1.00
(25.4)
3.00
(76.2)
See Note 2
0.72
(18.3)
1.25
(31.75)
SIDE
4 32
1
0.70 0.40 0.40 0.60
(17.8) (10.2) (10.2) (15.2)
0.30 ^{0.02 MIN.}
(7.6)
(0.5)
0.40
(10.2)
PHYSICAL CHARACTERISTICS
Case Size
Case Material
Shield Connection
12V and 24V Input Models
48V Input Models
Flammability
Weight
Unit/Comments
2.56 X 3.0 X 0.4 inches
(65.0 X 76.2 X 10.2 mm)
Coated Metal with Non-
Conductive Base
Negative Input
Positive Input
UL94V-0
142 Grams
PIN OUT CHART; CASE G
Pin Single
Dual
1 Remote On/Off Remote On/Off
2
+ Vin
+ Vin
3
- Vin
- Vin
4
Sync
Sync
5 +Sense/Trim(Down)* + Vout
6 Output Trim
Common
7 - Sense/Trim (Up)* - Vout
8
+ Vout*
Output Trim
9
- Vout*
No Pin
10
No Pin
No Pin
Triple
Remote On/Off
+ Vin
- Vin
Sync
+ Vout (Aux)
Common(Aux)
- Vout
+ Vout (Primary)
- Vout (Primary)
Output Trim (Primary)
* Connections for single output models without sensing or external trimming:
For proper operation, externally connect Pin 5 (+Sense) to Pin 8 (+Vout)
and Pin 7 (-Sense) to Pin 9 (-Vout)
CASE G-1
0.48 0.40 0.40 0.40 0.40 0.48
(12.2) (10.2) (10.2) (10.2) (10.2) (12.2)
0.25
(6.35) 0.25
(6.4)
6 7 8 9 10
0.50 0.50
(12.7) (12.7)
See
Note 2
BOTTOM
5 4321
1.25
(31.75)
3.00
(76.2)
1.25
(31.75)
0.040±.005
(1.01)
DIA.
2.56 (65.0)
0.02 MIN.
(0.5)
SIDE
0.40
(10.2)
PIN OUT CHART; CASE G-1
Pin Single
Dual
Triple
1 Remote On/Off Remote On/Off Remote On/Off
2
No Pin
No Pin
No Pin
3
Input*
Input*
Input*
4
Input*
Input*
Input*
5
NC
NC
NC
6
NC
- Vout
- Vout (Aux)
7
NC
Output Common + Vout (Aux)
8
- Vout Output Common Output Common
9
+ Vout
+ Vout + Output (Primary)
10 Output Trim Output Trim Output Trim (Primary)
* For 12V and 24V input models, Pin 3 is Minus (-) and Pin 4 is Plus (+). For
48V models, Pin 3 is (+) and Pin 4 is Minus (-).
Notes:
1. Unless otherwise specified dimensions are in inches (mm).
Tolerances Inches
mm
X.XX = ±0.02 X.X = ±0.5
X.XXX= ±0.010 X.XX = ±0.25
2. Mounting inserts: 4-40 X .10 (2.5) Deep
All specifications are typical at nominal input, nominal load and 25° C unless otherwise specified.
External, low ESR, 10 microfarad (minimum) capacitor across output is recommended for operation.
>> B-201