300WFR Datasheet, PDF (1/4 Pages) Make-Ps – Single & Dual Output DC/DC Converter

www.make-ps.com
E-mail:[e-mail]
300WFR series
Single & Dual Output
DC/DC Converter
FEATURES
• Up to 84% Efficiency
• Single & Dual Output, 2 to 3 watt converter
• 2 - 1 Input Range
• 1500 VDC Input / Output Isolation
• Short Circuit Protection
• MTBF > 1,000,000 Hours
DESCRIPTIONS
The 300WFR series 3 watts power modules are high
efficiency, low profile dc-dc converters that operate over a wide
input voltage range of 4.5 - 9 VDC, 9 - 18 VDC, 18 - 36 VDC and 36
- 72 VDC and provide precisely regulated output voltages of
3.3V, 5V, 12V, 15V, ±5V, ±12V and ±15V.
The -25^oC to +71^oC operating temperature range makes it
ideal for data communication equipment, mobile battery
driven equipment, distributed power systems, telecommunication
equipment, mixed analog/digital subsystems, process/
machine control equipment, computer peripheral systems
and industrial robot systems.
OUTPUT CHARACTERISTICS
Min Typ Max Unit/Comments
Output Voltage Set Point
±0.5 ±1.0 % Output voltage at
nominal line & FL
Output Voltage Balance
±0.5 ±2.0 % Equal Output
(Duals)
Loads
Line Regulation
±0.2 ±0.5 % Output voltage
measured from
min. input line to
maximum
Load Regulation
±0.2 ±0.5 % Output voltage
measured from FL
to 10% load
Ripple/Noise
45 60 mV p-p, Nom.Line
@FL, 20MHz B.W.,
using 1 μf bypass
capacitor
Ripple/Noise
100 mV p-p, Over Line,
Load & Temp., 20
MHz B.W.,
using 1 μf bypass
capacitor
Short Circuit Protection
Continuous,
Automatic Recovery
Transient Response Deviation
±3 ±5 % deviation of Vout
for a 25% load change
Over Power Protection
120
%
Transient Recovery Time
300 500 μS for 25% load
change
Temperature Coefficient
±0.01 ±0.02 % per degree C
INPUT CHARACTERISTICS
Min Typ Max Unit/Comments
Start Voltage
5 VDC Input Models 4.5 5 9 VDC
12 VDC Input Models 9 12 18 VDC
24 VDC Input Models 18 24 36 VDC
48 VDC Input Models 36 48 72 VDC
Input Fuse Requirements
5 VDC Input Models
1500
mA; Slow blow type
12 VDC Input Models
700
mA; Slow blow type
24 VDC Input Models
350
mA; Slow blow type
48 VDC Input Models
135
mA; Slow blow type
Reverse Polarity Input Current
1
A
GENERAL CHARACTERISTICS
Switching Frequency
Isolation Voltage
Isolation Resistance
Isolation Capacitance
MTBF (MIL-HBK-217F)
Min Typ Max Unit/Comments
300
kHz
1500
VDC, 1 minute
1000
Mohm, 500VDC
65 100 pF, 100kHz, 1Volt
1
Million Hours,
+25^oC, Ground
Benign
>> B-52