200HFR Datasheet, PDF (1/4 Pages) Make-Ps – Single & Dual Output DC/DC Converter

www.make-ps.com
E-mail:[e-mail]
200HFR series
Single & Dual Output
DC/DC Converter
F EATURES
• Up to 63% Efficiency
• Single & Dual Output, 2 watt converter
• 3000 VDC Input / Output Isolation
• Short Circuit Protection
• MTBF > 800,000 Hours
DESCRIPTIONS
INPUT CHARACTERISTICS
The 200HFR series 2 watts power modules are high
efficiency, low profile dc-dc converters that operate over input
voltage ranges of 4.75-5.25 VDC, 10.8-13.2 VDC, and 21.6-26.4 VDC
and provide precisely regulated output voltages of 5V, 12V, 15V,
±12V and ±15V.
The -25^oC to +71^oC operating temperature range makes it
ideal for data communication equipment, mobile battery
driven equipment, distributed power systems, telecommunication
equipment, mixed analog/digital subsystems, process/
machine control equipment, computer peripheral systems
and industrial robot systems.
OUTPUT CHARACTERISTICS
Start Voltage
5 VDC Input Models
12 VDC Input Models
24 VDC Input Models
Min Typ Max Unit/Comments
4.75
5.25 VDC
10.8
13.2 VDC
21.6
26.4 VDC
GENERAL CHARACTERISTICS
Output Voltage Set Point
Output Voltage Balance
(Duals)
Line Regulation
Load Regulation
Ripple/Noise
Short Circuit Protection
Temperature Coefficient
Min Typ Max Unit/Comments
±5.0 % Output voltage at
nominal line & FL
±3.0 % Equal Output
Loads
±0.5 % Output voltage
measured from
min. input line to
maximum
±0.5 % Output voltage
measured from FL
to 10% load
50 mV p-p, Nom.Line
@FL, 20MHz B.W.,
using 1 μf bypass
capacitor
Continuous,
Automatic Recovery
±0.02 % per degree C
Switching Frequency
Isolation Voltage
Isolation Resistance
Isolation Capacitance
Input Filter
MTBF (MIL-HBK-217F)
Min Typ Max Unit/Comments
40
kHz
3000
VDC, 1 minute
1000
Mohm, 500VDC
20 pF, 100kHz, 1Volt
Pi Filter
0.8
Million Hours,
+25^oC, Ground
Benign
>> 1