1000FPW Datasheet, PDF (1/4 Pages) Make-Ps – Single & Dual Output DC/DC Converter

www.make-ps.com
E-mail:[e-mail]
1000FPW series
Single & Dual Output
DC/DC Converter
FEATURES
• 6 sided Continuous Shielding
• Wide 2:1 Input Voltage Range
• Efficiency to 83%
• >700,000 Hours MTBF
DESCRIPTIONS
The 1000PFW series is a family of compact 10 W, high
performance DC/DC converters. These converters are
specifically designed to provide the flexibility, power density,
and reliability required to fulfill local power needs in
applications ranging from telecom switch systems to
portable instrumentation. 24 models operate over 2:1 input
ranges of 9 to 18, 18 to 36 or 36 to 72 VDC; providing single,
dual or triple output combinations of 3.3, 5, 12, 15, 24, ±5, ±12
and ±15 VDC. All models are packaged in compact, low
profile 2.0” X 1.0” X 0.4” metal cases.
OUTPUT CHARACTERISTICS
INPUT CHARACTERISTICS
Input Voltage Range
12 VDC Input Models
24 VDC Input Models
48 VDC Input Models
Input Filter
Min Typ Max Unit/Comments
9 12 18 VDC
18 24 36 VDC
36 48 72 VDC
Pi Filter
GENERAL CHARACTERISTICS
Output Voltage Accuracy
Voltage Balance:
Dual Outputs
Line Regulation
Load Regulation
Single Outputs
Dual Outputs
Ripple/Noise
Short Circuit Protection
Temperature Coefficient
Minimum Load
Min Typ Max Unit/Comments
±1.0 % ¹
±2.0 %; Equal Output Loads
±0.3 % ²
±0.5 % ³
±0.5 % ³ ; Equal Loads
100 mV Pk-Pk
Continuous, Automatic
Recovery
±0.02 % per ^oC
10 % Full load
Switching Frequency
Isolation Voltage
Isolation Resistance
MTBF (MIL-HBK-217F)
Min Typ Max Unit/Comments
350
kHz
1500
VDC, 1 minute
1000
Mohm, 500VDC
700
Thousand Hours,
+25^oC, Ground
Benign
1 _{= Output voltage at nominal line & FL}
2 _{= % Output voltage measured from min. input line to maximum}
3 _{= Output voltage measured from FL to 10% Load}
>> 1