SSHS-1-D Datasheet, PDF (1/2 Pages) Major League Electronics – .100 cl Dual Row Socket Strips - Straight

Major League Electronics .100 cl Socket Strips - Straight
Ordering Information
SSHS-1 XX D XX XX XX XXX LF
Pins Per Row
01 - 40
Row Specification
D = Double
Pin Option
LF = Lead Free
Polarized Position
Leave blank if not needed
If required, specify empty pin position, e.g. 012 for Pin 12
Length
Tail Length
.435 11.05mm .100 2.54mm 02
.455 11.56mm .120 3.05mm 04
.525 13.34mm .190 4.83mm 06
Lock Tight "LT" (Optional)
Leave blank if not needed
LT = With
.725 18.42mm .390 9.91mm 08
.925 23.50mm .560 14.22mm 10
Plating Options
G - 10µ Gold on Contact area/Flash on Tail
T - Matte Tin all Over
F - Gold Flash Over Entire Pin
GT - 10µ Gold on Contact Area / Matte Tin on Tail
Specifications
H - 30µ Gold on Contact Area / Matte Tin on Tail
Insertion Depth: .145 (3,68) to .250 (6,35)
Insertion Force - Per Contact - H Plating:
6oz. (1,67N) avg with .025 (0,64mm) sq. pin
Withdrawal Force - Per Contact - H Plating:
5oz. (1,39N) avg with .025 (0,64mm) sq. pin
Current Rating: 3.0 Ampere
Insulation Resistance: 1000MΩ Min.
Mates with:
Dielectric Withstanding: 600V AC
BSTC,
TSHCR,
Contact Resistance: 20 mΩ Max.
BSTCM, TSHCRE,
Operating Temperature: -40°C to + 105°C
BSTCR,
TSHCRSM,
Max. Process Temperature:
BSTCRSM, TSHR,
Peak: 260°C up to 20 secs.
BSTS,
TSHRE,
Process: 230°C up to 60 secs.
LBSTCM, TSHS,
Wave: 260°C up to 6 secs.
LTSHCR, TSHSCM,
Manual Solder: 350°C up to 5 secs.
LTSHCRE, TSHSM,
LTSHR,
ULTSHSM,
Materials
LTSHRE, ULTSHC,
Contact Material: Phosphor Bronze
LTSHSM, ULTHSCR
Insulator Material: Nylon 6T
TSHC,
Plating: Au or Sn over 50µ" (1,27) Ni
Products cut to specific sizes are uncancellable/nonreturnable
Parts are subject to change without notice
SSHS-1-D SERIES
.100 cl Dual Row
Socket Strips - Straight
11 DEC 06
4235 Earnings Way, New Albany, Indiana, 47150, USA
1-800-782-3486 (USA/Canada/Mexico)
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.mlelectronics.com