SHTSHR-2 Datasheet, PDF (1/2 Pages) Major League Electronics – .079" cl Shrouded Terminal Strip Header Right Angle

Major League Electronics .079" cl Shrouded Terminal Strip Header
Ordering Information
SHTSHR-2 XX _- D _- XX _- A _- XX _- XX - XXX _- LF
Pins Per Row
05 - 25
Double
Pin Options
Tail Length
2.54 (.100)
02
3.00 (.118)
04
Post Option
Plating Options
- 10µ Gold on Contact area/Flash on Tail
G
- 10µ Gold on Contact Area/Matte Tin on Tail GT
- Matte Tin all Over
T
- Gold Flash Over Entire Pin
F
Lead Free
Polarized Position
001 - 050
Leave blank if not needed
Lock Tight "LT" (Optional)
LT = With
Leave blank if not needed
Two tails per strip are crimped in opposing directions on or near the centerline.
Must have a minimum dimension of .050". Recommended hole size of .040".
Mates with:
IDS-2
Insulator
Polyester UL 94V-0 Nylon 6T
Contact
Copper Alloy
Insulation Resistance _{1000 MOHMS min.}
Contact Resistance 20 mOHMS max.
Current Rating
Dielectric Withstanding
Operating Temperature
1 Amp
500V AC/DC
-40°C to +105°C
Products cut to specific sizes are uncancellable/nonreturnable
SHTSHR-2 SERIES
.079" cl Shrouded Terminal Strip Header
Right Angle
Parts are subject to change without notice
23 APR 07
4235 Earnings Way, New Albany, Indiana, 47150, USA
1-800-782-3486 (USA/Canada/Mexico)
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.mlelectronics.com