SHTSHR-1 Datasheet, PDF (1/1 Pages) Major League Electronics – .100" cl Shrouded Board Stacker Terminal Strips Right Angle

Major League Electronics .100" cl Shrouded Board Stacker Terminal Strips
Ordering Information
SHTSHR-1 XX - D - XX - A - XX - XX - XXX - LF
Pins Per Row
03 - 32
Lead Free
Double
Pin Options
Tail Length
2.54 (.100)
02
3.00 (.118)
04
Post Option
Plating Options
- 10µ Gold on Contact area/Flash on Tail
G
- 10µ Gold on Contact Area/Matte Tin on Tail GT
- Matte Tin all Over
T
- Gold Flash Over Entire Pin
F
Polarized Position
001 - 064
Leave blank if not needed
Lock Tight "LT" (Optional)
LT = With
Leave blank if not needed
Two tails per strip are crimped in opposing directions on or near the centerline.
Must have a minimum dimension of .050". Recommended hole size of .040".
Mates with:
IDS-1
Insulator
Contact
Insulation resistance
Polyester UL 94V-0 Nylon 6-T
Copper Alloy
1000 MOHMS min.
Contact Resistance 20 mOHMS max.
Current Rating
Dielectric Withstanding
Operating Temperature
3 Amps
600V AC
-40°C to +105°C
Products cut to specific sizes are uncancellable/nonreturnable
Parts are subject to change without notice
SHTSHR-1 SERIES
19 APR 07 .100" cl Shrouded Board Stacker Terminal Strips
Right Angle
4235 Earnings Way, New Albany, Indiana, 47150, USA
1-800-782-3486 (USA/Canada/Mexico)
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.mlelectronics.com