FPH5-2 Datasheet, PDF (1/2 Pages) Major League Electronics – .0197cl Dual Row - Straight Surface Mount Board to Board Plug

Major League Electronics .0197 cl Fine Pitch Header
Ordering Information
FPH5-2 XX - D - XXX - F - V - XX - X - XX - LF
Pins Per Row
05 - 30
Row Specification
D = Dual Row
Lead Free
Alignment Pin
Leave blank if not needed
AP = With
Pin Options
Body Height
.098 2.50mm
098
.128 3.25mm
128
.157 4.00mm
157
Plating Options
Gold Flash over Entire Pin F
Vertical
Specifications
Current Rating: 0.5 Ampere AC/DC
Voltage Rating: 50V AC/DC
Insulation Resistance: 100MΩ Min. @ 500V DC
Dielectric Withstanding: 500V AC for one minute
Contact Resistance: 50mΩ Max.
Operating Temperature: -25°C to + 85°C
Max. Process Temperature: 260°C up to 10 secs.
Packing Information
TR-P = Tape and Reel with Plastic Pick and Place pad
TB-P = Tube with Plastic Pick and Place pad
TB-0 = Tube without Pick and Place Pad
If left blank, packaging at MLE's discretion
Pad may be metal, mylar or plastic
TABLE A
HEADER
FPH5-2-XX-D-098
FPH5-2-XX-D-098
FPH5-2-XX-D-128
FPH5-2-XX-D-128
FPH5-2-XX-D-157
SOCKET
FPS5-2-XX-D-087
FPS5-2-XX-D-106
FPS5-2-XX-D-106
FPS5-2-XX-D-126
FPS5-2-XX-D-126
MATED
HEIGHT 'M'
HEADER
HEIGHT 'H'
SOCKET
HEIGHT 'S'
.118 (3.00mm) .098 (2.50mm) .087 (2.20mm)
.138 (3.50mm) .098 (2.50mm) .106 (2.70mm)
.157 (4.00mm) .128 (3.25mm) .106 (2.70mm)
.177 (4.50mm) .128 (3.25mm) .126 (3.20mm)
.197 (5.00mm) .157 (4.00mm) .126 (3.20mm)
Materials
Contact Material: Brass
Insulator Material: Nylon 46 Plastic, UL94V-0
Plating: Gold Flash over entire pin
Products cut to specific sizes are uncancellable/nonreturnable
Mates With
FPS5-2
Parts are subject to change without notice
FPH5-2 SERIES
.0197cl Dual Row - Straight
Surface Mount Board to Board Plug
29 MAY 09
4235 Earnings Way, New Albany, Indiana, 47150, USA
1-800-782-3486 (USA/Canada/Mexico)
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.mlelectronics.com