BSTS-2-S Datasheet, PDF (1/1 Pages) Major League Electronics – .079cl Single Row - Straight Board Stacker Terminal Strips

Major League Electronics .079 cl Board Stacker Terminal Strips - Straight
Ordering Information
BSTS-2 XX S X XX XX XXX XX XXX LF
Pins Per Row
01 - 40
Row Specification
S = Single Row
Lead Free
Tail Length
A = .090 (2.29mm)
B = .180 (4.57mm)
Pin Options
Polarized Position
Leave blank if not needed
If required, specify empty pin position, e.g. 012 for Pin 12
Length
.255 6.48mm
01
.323 8.20mm
02
Lock Tight "LT" Option
Leave blank if not needed
LT = With
.377 9.58mm
03
.397 10.08mm 04
.417 10.59mm 06
.456 11.58mm 07
Desired Board Space
Please specify
e.g. .100 (2.54) = 100
.555 14.10mm 08
.535 13.59mm 09
.575 14.61mm 10
.594 15.09mm 12
.614 15.60mm 14
.673 17.09mm 15
.713 18.11mm 16
Plating Options
G 10µ Gold on Contact Area / Flash on Tail
T Matte Tin All Over
GT 10µ Gold on Contact Area / Matte Tin on Tail
H 30µ Gold on Contact Area / Matte Tin on Tail
F Gold Flash over Entire Pin
.733 18.62mm 17
.752 19.10mm 18
.830 21.08mm 22
.871 22.12mm 24
Specifications
Current Rating: 3.0 Ampere
.950 24.13mm 28
1.110 28.19mm 30
1.117 28.37mm 36
Insulation Resistance: 1000MΩ Min.
* N/A WITH .180 TAIL
Dielectric Withstanding: 500V AC
Contact Resistance: 20 mΩ Max.
Operating Temperature: -40°C to + 105°C
Max. Process Temperature:
Peak: 260°C up to 10 secs.
Process: 230°C up to 60 secs.
Wave: 260°C up to 6 secs.
Manual Solder: 350°C up to 5 secs.
Mates with:
BCSS,
BSSH,
BSSHC,
BSSQ,
BSSQC,
BSSQM,
LSMBC,
LSSHSM,
SMBC,
SSHQ,
SSHQR,
SSHR,
Materials
Contact Material: Phosphor Bronze
Insulator Material: Nylon 6T
SSHS,
SSHSM,
ULSMBC
Plating: Au or Sn over 50µ" (1,27) Ni
Products cut to specific sizes are uncancellable/nonreturnable
Parts are subject to change without notice
BSTS-2-S SERIES
.079cl Single Row - Straight
Board Stacker Terminal Strips
19 FEB 07
4235 Earnings Way, New Albany, Indiana, 47150, USA
1-800-782-3486 (USA/Canada/Mexico)
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.mlelectronics.com