1-5102154-0 Datasheet, PDF (86/100 Pages) Tyco Electronics – Ribbon Cable Interconnect Solutions

Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers, Military, Center and
Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Mounting Information
4-24 self-tapping screws
and 2-56 bolts and nuts
are available for mounting
straight-thru pin headers
of pc boards. Typical appli-
cations and part nos. for
ordering this hardware are
presented below.
.100
[2.54]
E
F
.100
[2.54]
.060
[1.52]
Position No. 1
.350
[8.89]
.035
[0.89] ^Dia.
Recommended Mounting Hole Pattern
For Vertical PCB Mount Headers
PC board thicknesses are : .062 [1.57] for .110 [2.79] long posts,
.125 [3.18] for .155 [3.94] long posts.
.106
[2.88] ^Dia.
(For Nut & Bolt
hardware)
.116
[2.95]
Dia.
(For Self-Tapping
Screw hardware)
Note: 2-56 bolts and nuts may be
used to mount pin headers with and
without latches. If latches are to be
used, the bolts must be positioned in
the pin header before the latches are
installed.
4-24
Self-Tapping
Screw
(2 Req‘d.)
Pin Header Mounting using 4-24 Self-Tapping Screws:
Part No. 19156-1 (for .062 [1.57] Thick PC Board)
Part No. 19156-2 (for .093 [2.36] Thick PC Board)
Part No. 19156-3 (for .125 [3.18] Thick PC Board)
Latch
(See Note
at left.)
2-56
Bolt & Nut
(2 Each Req‘d.)
.256
[6.50]
Pin Header Mounting with 2-56 Bolts and Nuts:
Part No. 746383-1 (Bolt Only)
Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit)
86
Catalog 82012
Revised 4-12
www.te.com
Note: All part numbers are RoHS compliant.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
USA: [phone]
Canada: [phone]
Mexico/C. Am.: [phone]
Latin/S. Am.: [phone]
Germany: [phone]
UK: [phone]
France: [phone]
Netherlands: [phone]
China: [phone]