V23105 Datasheet, PDF (8/11 Pages) Tyco Electronics – The Best Relaytion

D2n Relay
Insulation
Insulation resistance at 500 Vdc
Dielectric test voltage (1 min)
between coil and contacts
between adjacent contact sets
between open contacts
Surge voltage resistance
according to FCC 68 (10 / 160 ms)
between coil and contacts
between adjacent contact sets
between open contacts
High Frequency Data
Capacitance
between coil and contacts
between adjacent contact sets
between open contacts
RF Characteristics
Isolation at 100 / 900 MHz
Insertion loss at 100 / 900 MHz
V.S.W.R. at 100 / 900 MHz
V23105
> 10⁹ W
1000 Vrms
750 Vrms
750 Vrms
1500 V
1500 V
1500 V
max. 2 pF
max. 1.5 pF
max. 1 pF
-39.0 dB / -20.7 dB
-0.02 dB / -0.27 dB
1.04 / 1.40
General data
Operate time at U_nom typ. / max.
Release time without diode in parallel, typ. / max.
Release time with diode in parallel, typ. / max.
Bounce time at closing contact, typ. / max.
Maximum switching rate without load
Ambient temperature
150 and 200 mW coil
400 mW coil
500 mW coil
Thermal resistance
Maximum permissible coil temperature
Vibration resistance (function)
Shock resistance, half sinus, 11 ms
Degree of protection / Environmental protection
Needle flame test
Mounting position
Processing information
Weight (mass)
Terminal coating
Resistance to soldering heat
All data refers to 23° C unless otherwise specified.
5 ms / 7 ms
4 ms / 6 ms
7 ms / 10 ms
3 ms / 5 ms
20 operations/s
-25° C ... +85° C
-25° C ... +75° C
-25° C ... +60° C
< 100 K/W
105° C
10 g
10 to 55 Hz
10 g (function)
40 g (damage)
immersion cleanable, IP 67 / RT III
application time 20 s, burning time < 15 s
any
Ultrasonic cleaning is not recommended
max. 2.5 g
SnCu 0,7
260° C / 10 s
Page 8 (11) 108-98007 Rev. C