917845-1 Datasheet, PDF (61/134 Pages) Tyco Electronics – AMP Soft Shell Pin and Socket Connectors

Contacts and
Product Composition
Contacts
Material and Finish
Pre-tinned copper alloy
Receptacle for Plug Housing,
Tab for Cap Housing
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued)
Receptacle
Wire Range
AWG
mm²
26-22 0.14~0.34
20-16 0.51~1.38
Ins. Dia.
(Note)
1.30~2.00
2.00~3.10
Contact Part No.
Receptacle
Tab
Strip
Form
177914-1
177914-2*
177915-1
177915-2*
Loose
Piece
179592-1
179592-2*
179593-1
179593-2*
Strip
Form
177916-1
Loose
Piece
179594-1
177917-1 179595-1
Note: Maximum diameter is 2.8 mm when Double Lock Plate is used.
*Part Number suffix -2 represents high contact pressure type.
Extraction Tool P/N : 234912-1 (For receptacle contact)
234914-1 (For tab contact)
Note: Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Applicator Part Number.
Tab
Applicator
Part No.
680283-X
680286-X
CERTI-CRIMP II
Hand Tool
Part No.
91567-1
91569-1
Positive mounting achieved
with Double Lock mechanism.
Product Composition
ቢ Contact is partially-mounted.
ባ Double Lock Plate is set.
ቤ Contact is fully pushed in as
Double Lock Plate is pressed.
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
Power Double Lock Connector is composed
of the components listed below:
I Tab and receptacle contacts
I Free-hanging plug housing
I Free-hanging cap housing
I Panel mount cap housing
I PC Board-mount tab header
I Double Lock Plate
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
61
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208