MB39A102_05 Datasheet, PDF (6/32 Pages) Tyco Electronics – 4-ch DC/DC Converter IC

MB39A102
■ ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Condition
Rating
Unit
Min
Max
Power supply voltage
VCC VCC, VCCO terminals
⎯
Output current
IO
OUT1 to OUT4 terminals
⎯
Output peak current
IOP
OUT1 to OUT4 terminals
Duty ≤ 5% (t = 1/fOSC×Duty)
⎯
Ta ≤ +25 °C (TSSOP-30P)
⎯
Power dissipation
PD
Ta ≤ +25 °C (BCC-32P)
⎯
Storage temperature
TSTG
⎯
−55
12
V
20
mA
400
mA
1390*
mW
980*
mW
+125
°C
* : The packages are mounted on the epoxy board (10 cm × 10 cm).
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■ RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
Condition
Min
Power supply voltage
VCC VCC, VCCO terminals
2.5
Reference voltage output current IREF VREF terminal
−1
Input voltage
−INE1 to −INE4 terminals 0
VINE
−INS terminal
0
VDTC DTC1 to DTC4 terminals
0
Control input voltage
VCTL CTL terminal
0
Output current
IO OUT1 to OUT4 terminals −15
Oscillation frequency
fOSC *
100
Timing capacitor
CT
⎯
39
Timing resistor
RT
⎯
11
Soft-start capacitor
CS CS1 to CS4 terminals
⎯
Short detection capacitor
CSCP
⎯
⎯
Reference voltage output
capacitor
CREF
⎯
⎯
Operating ambient temperature Ta
⎯
−30
Value
Typ
4
⎯
⎯
⎯
⎯
⎯
⎯
500
100
24
0.1
0.1
Max
11
0
VCC − 0.9
VREF
VREF
11
+15
1500
560
130
1.0
1.0
Unit
V
mA
V
V
V
V
mA
kHz
pF
kΩ
µF
µF
0.1
1.0
µF
+25
+85
°C
* : See “■ SETTING THE TRIANGULAR OSCILLATION FREQUENCY”.
Note : Pin numbers referred after this part are present on TSSOP-30P PKG.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
6