5-1462000-5 Datasheet, PDF (6/9 Pages) Tyco Electronics – 2 pole telecom/signal relay Through Hole Type (THT) Non-polarized. non-latching 1 coil

MT2 Relay
Contact Data
Number of contacts and type
Contact assembly
Contact material
Limiting continuous current at max. ambient temperature
Maximum switching current
Maximum swichting voltage
Maximum switching capacity
Thermoelectric potential
Minimum switching voltage
Initial contact resistance / measuring condition: 10 mA / 20 mV
Electrical endurance Contact application 0 (30 mV/ 10 mA)
Cable load open end
Resistive load 150 V / 0.2 A - 30 W
24 V / 1.25 A - 30 W
Mechanical endurance
UL contact ratings
Max. DC load breaking capacity
2 changeover contacts
Bifurcated contacts
Silver-nickel, gold-covered
2A
2A
220 Vdc
250 Vac
60 W, 62.5 VA
< 10 mV
100 mV
< 70 mW
min. 5 x 10⁶ operations
min. 2.5 x 10⁶ operations
min. 2.0 x 10⁵ operations
min. 2.0 x 10⁵ operations
typ. 10⁸ operations
220 Vdc / 0.24 A - 60 W
125 Vdc / 0.24 A - 30 W
250 Vac / 0.25 A - 62.5 VA
125 Vac / 0.5 A - 62.5 VA
30 Vdc / 2 A - 60 W
DC current [A]
Insulation
Insulation resistance at 500 Vdc
Dielectric test voltage (1 min)
between coil and contacts
between adjacent contact sets
between open contacts
Surge voltage resistance
according to FCC 68 (10 / 160 ms) and IEC (10 / 700 ms)
between coil and contacts
between adjacent contact sets
between open contacts
> 10⁹ W
1050 Vrms
750 Vrms
750 Vrms
1500 V
1500 V
1500 V
Page 6 (9)
108-98006 Rev. C