45442 Datasheet, PDF (6/8 Pages) Tyco Electronics – SOLISTRAND Crimping Dies

Die Closure
Configuration
Suggested Plug Gage Design
GO
Dimension
“B”
“C” Typ.
408- 1697
NO- GO
Dimension
“B”
“R”
“A” Dim.
“L” Typ.
“R”
CRIMPING DIE
HEAD
SET
DIE CLOSURE
DIMENSIONS “A”{
GO
NO- GO
GAGE MEMBER}
DIMENSIONS “B”
GO
NO- GO
RADIUS
“R”
GAGE MEMBER
LENGTH
“L”
“C”
46145,
46146
2.54 [.1000]
2.692 [.1060]
2.54--2.548
[.1000--.1003]
2.690--2.692
[.1059--.1060]
3.18 [.125]
25.4 [1.000]
12.7 [.500]
46133,
46134
3.937 [.1550]
4.089 [.1610]
3.937--3.945
[.1550--.1553]
4.087--4.089
[.1609--.1610]
4.34 [.171]
25.4 [1.000] 11.10 [.437]
69097
46133,
46135
4.724 [.1860]
4.877 [.1920]
4.724--4.732
[.1860--.1863]
4.874--4.877
[.1919--.1920]
5.54 [.218]
25.4 [1.000] 11.10 [.437]
46133,
46136
5.436 [.2140]
5.588 [.2200]
5.436--5.443
[.2140--.2143]
5.585--5.588
[.2199--.2200]
6.35 [.250]
25.4 [1.000] 11.10 [.437]
46137,
46138
5.207 [.2050]
5.359 [.2110]
5.207--5.215
[.2050--.2053]
5.357--5.359
[.2109--.2110]
7.29 [.287] 31.75 [1.500] 14.27 [.562]
69216
2.54 [.1000]
2.692 [.1060]
2.54--2.548
[.1000--.1003]
2.690--2.692
[.1059--.1060]
3.18 [.125]
25.4 [1.000]
12.7 [.500]
69217
3.150 [.1240]
3.302 [.1300]
3.150--3.157
[.1240--.1243]
3.299--3.302
[.1299--.1300]
4.34 [.171]
25.4 [1.000]
8.64 [.340]
69218
3.962 [.1560]
4.115 [.1620]
3.962--3.970
[.1560--.1563]
4.112--4.115
[.1619--.1620]
5.54 [.218]
25.4 [1.000]
9.91 [.390]
69099
45433 4.547 [.1790]
45436 5.207 [.2050]
4.699 [.1850]
5.359 [.2110]
4.547--4.554
[.1790--.1793]
5.207--5.215
[.2050--.2053]
4.696--4.699
[.1849--.1850]
5.357--5.359
[.2109--.2110]
6.35 [.250] 31.75 [1.500] 11.51 [.453]
7.52 [.296] 38.1 [1.500] 15.88 [.625]
45439
5.867 [.2310]
6.020 [.2370]
5.867--5.875
[.2310--.2313]
6.017--6.020
[.2369--.2370]
8.33 [.328]
38.1 [1.500] 15.88 [.625]
45442
6.604 [.2600]
6.756 [.2660]
6.604--6.612
[.2600--.2603]
6.754--6.756
[.2659--.2660]
9.52 [.375]
38.1 [1.500] 15.88 [.625]
45445
7.417 [.2920]
7.569 [.2980]
7.417--7.424
[.2920--.2923]
7.567--7.569
[.2979--.2980]
10.69 [.421]
38.1 [1.500]
15.88 [.625]
{ Die closure dimensions apply when dies are bottomed, but not under pressure, (Dies for 69097 tool).
Die closure dimensions apply when dies are positioned at “gage dimension” indicated in Figure 10, Detail “A”, (Dies for 69099 tool).
} Material -- Tool Steel
Figure 9
6 of 8
Rev C