MA4ST300_1 Datasheet, PDF (5/5 Pages) Tyco Electronics – Low-Voltage / Wide Band Si Hyperabrupt Varactors

Low-Voltage / Wide Band
Si Hyperabrupt Varactors
Mounting Information
The illustration indicates the recommended
mounting pad configuration for the
SC-79, SOT-323 and SOD-323 packages. Solder
paste containing flux should be screened onto the
pads to a thickness of 0.005- 0.007 inches. The
plastic package is placed in position, firmly adhering
to the solder paste.
Permanent attachment is performed by a reflow
soldering procedure during which the tab
temperature does not exceed +275 °C and the body
temperature does not exceed +250 °C, for standard
models and +260 °C for the RoHS compliant
devices.
Please refer to Application Note M538 for surface
mounting instructions.
Also Offering
RoHs Compliant
Equivalent Parts
SC-79
0.020
0.50
MA4ST300 Series
V4
0.020
0.50
0.053
1.35
Dimenstions:inches
mm
SOT-323
0.030
0.80
0.030
0.80
0.030
0.80
0.075
1.9
0.030
0.80
Dimenstions: ^inches
mm
SOD-323
0.030
0.80
0.030
0.80
0.030
0.80
.090
2.2
Dimenstions: ^inches
mm
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.