5749234-3 Datasheet, PDF (5/37 Pages) Tyco Electronics – Right-Angle Posted Connectors

Plug/Receptacle Mating
AMPLIMITE Subminiature D Connectors
Plug/Receptacle Mating and Panel Mounting Specifications
Plug
(Typ.)
.265^±.015
[6.73^±0.381]
for Shell Sizes 1 and 2
.256^±.015
[6.50^±0.381]
for Shell Sizes 3, 4 and 5
Receptacle
(Typ.)
The .265 [6.73] dimension
is required to assure full
mating of connector halves.
This dimension must be
taken into consideration
when determining the
method of mounting, panel
thickness, etc.
Panel Mounting
[3^.1.0T²5y⁰_p^±±0_.^..00₍⁰⁵₂²⁰]PDDlisai.a).*.***
A
C
D
10°^±2
A
(2 Pls.)
.040
[1.02]
Typ. (2
Dia.
HDoilae.s)
J* E
F
B
H*
K Radius
(4 Pls.)
.129 ^{± .002}
[3.28^{± 0.050}]
Cutout for Rear Mount and
Short Latching Block
Note: Cutouts are for either plug or receptacle, front or rear panel mount.
Shell
Size
(Pos.)
Mounting
Method
Front/Rear
Panel
A
B
C
Dimensions
D
E
F
*H*
*J*
K
1
Front
.984
24.99
.492
12.50
.874
22.20
.437
.513 .257
11.10 13.03 6.53
—
—
.083
2.11
(9)
Rear
.984
.492
.806
.403
.449 .225
.550
.750 .132
24.99 12.50
20.47
10.24 11.41 5.72 13.97 19.05
3.35
2
Front
1.312
33.33
.656
16.66
1.202
30.53
.601
.513 .257
15.27 13.03 6.53
—
—
.083
2.11
(15)
Rear
1.312
.656
1.134
.567
.449 .225
.730
.750 .132
33.33 16.66
28.80
14.40 11.41 5.72 18.54 19.05
3.35
3
Front
1.852
47.04
.926
23.52
1.743
44.27
.872
.513 .257
22.15 13.03 6.53
—
—
.083
2.11
(25)
Rear
1.852
.926
1.674
.837
.449 .225 1.275
.750 .132
47.04 23.52
42.52
21.26 11.41 5.72 32.39 19.05
3.35
4
Front
2.500
63.50
1.250
31.75
2.391
60.73
1.196
.513 .257
30.38 13.03 6.53
—
—
.083
2.11
(37)
Rear
2.500 1.250
2.326
1.163
.449 .225 1.920
.750 .132
63.50 31.75
59.08
29.54 11.41 5.72 46.05 16.13
3.35
5
Front
2.406
61.11
1.203
30.56
2.297
58.34
1.149
.623 .312
29.19 15.82 7.93
—
—
.083
2.11
(50)
Rear
2.406 1.203
2.218
1.109
.555 .278 1.753
.750 .132
61.11 30.56
56.34
28.17 14.10 7.06 44.52 19.05
3.35
**Panel cutout configuration with H and J dimensions provides clearance for mounting connectors with cable clamps.
**This dimension is .190^±002 [4.83^±0.05] when posted connectors with fixed female screwlocks are rear-panel mounted.
Most plugs and receptacles
can be mounted to a panel
from either the front or rear,
using a variety of accessory
hardware. Posted receptacles
are rear panel mounted only.
Typical examples are shown
below.
Typical Front-Panel Mounted
Subminiature D Plug
42
Catalog 82068
Revised 4-12
www.te.com
Typical Rear-Panel Mounted
Subminiature D Receptacle
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
USA: [phone]
Canada: [phone]
Mexico/C. Am.: [phone]
Latin/S. Am.: [phone]
Germany: [phone]
UK: [phone]
France: [phone]
Netherlands: [phone]
China: [phone]