408-9177 Datasheet, PDF (4/5 Pages) Tyco Electronics – Crimping Die Assemblies

Die Assemblies 47378- 1, 48756- 1, and 48757- 1
408- 9177
Suggested Plug Gage Design for Wire Barrel Crimp
GO Dim.
NO- GO Dim.
DIE
ASSEMBLY
47378--1
25.4 [1.00]
(Typ)
GAGE ELEMENT DIMENSIONS
GO
NO- GO
10.185--10.193
[.4010--.4013]
10.335--10.338
[.4069--.4070]
GO Dim.
NO- GO Dim.
R
(Typ)
DIE
ASSEMBLY
48756--1
48757--1
25.4 [1.00]
(Typ)
12.7 [.500]
(Typ)
GAGE ELEMENT DIMENSIONS
GO
NO- GO
RADIUS
“R”
10.185--10.193
[.4010--.4013]
10.335--10.338
[.4069--.4070]
13.00
[.512]
11.354--11.361
[.4470--.4473]
11.504--11.506
[.4529--.4530]
14.73
[.580]
6. REPLACEMENT AND REPAIR
The parts listed in Figure 6 are customer--
replaceable. A complete inventory can be stocked
and controlled to prevent lost time when replacement
of parts is necessary. Order replacement parts
through your Tyco Electronics Representative, or call
1--800--526--5142, or send a facsimile of your
purchase order to 1--717--986--7605, or write to:
CUSTOMER SERVICE (38--35)
TYCO ELECTRONICS CORPORATION
P.O. BOX 3608
HARRISBURG, PA 17105--3608
For repair service, please contact an Tyco Electronics
Representative at 1--800--526--5136.
7. REVISION SUMMARY
Since the previous release of this sheet, the following
changes were made:
S Updated document to corporate requirements
S Added new text to Section 1
S Added new documents to Section 1
S New logo and format
Crimping
Chamber
GO
Element
GO Gage Element Must
Pass Completely Through
the Crimping Chamber.
NO- GO
Element
NO- GO Gage Element May
Enter Partially, But Must
Not Pass Completely
Through the Length of the
Crimping Chamber.
Figure 5
4 of 5
Tyco Electronics Corporation
Rev C